DEXTER ADHESIVES & STRUCTURAL MATERIALS DIVISION -- EPOXY PATCH KIT 0151, PART A (RESIN)  -- 8040-00-061-8303
<pre>=====================  Product Identification  =====================

Product ID:EPOXY PATCH KIT 0151, PART A (RESIN)
MSDS Date:01/01/1988
FSC:8040
NIIN:00-061-8303
Kit Part:Y
MSDS Number: BCWSR
=== Responsible Party ===
Company Name:DEXTER ADHESIVES & STRUCTURAL MATERIALS DIVISION
Address:2850 WILLOW PASS ROAD
Box:312
City:PITTSBURG
State:CA
ZIP:94565
Country:US
Info Phone Num:415-687-4201
Emergency Phone Num:415-687-4201
Preparer's Name:SAZANNE FRANZ
CAGE:33564
=== Contractor Identification ===
Company Name:DEXTER CORP DEXTER ELECTRONIC MATERIALS DIV
Address:15051 E DON JULIAN RD
Box:City:LA PUENTE
State:CA
ZIP:91746
Country:US
Phone:818-968-6511
CAGE:12405
Company Name:DEXTER CORPORATION ADHESIVE & COATING SYSTEMS
Address:2850 WILLOW PASS ROAD
Box:312
City:BAY POINT
State:CA
ZIP:94565-3299
Country:US
Phone:202-483-7616
CAGE:33564

=============  Composition/Information on Ingredients  =============

Ingred Name:EPOXY RESIN

Ingred Name:SILICA, AMORPHOUS, DUST
CAS:112945-52-5
RTECS #:VV7310000
Fraction by Wt: <5%
OSHA PEL:6 MG/M3
ACGIH TLV:10 MG/M3; 8990

Ingred Name:N-BUTYL GLYCIDYL ETHER (BGE)
CAS:2426-08-6
RTECS #:TX4200000
Fraction by Wt: <10%
OSHA PEL:50 PPM
ACGIH TLV:25 PPM; 9293

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE IRRITATION AND POSSIBLE
    ALLERGIC REACTIONS. MAY SENSITIZE ALLERGIC REACTIONS.
Explanation of Carcinogenicity:NONE OF THE COMPOUNDS IN THIS PRODUCT IS
    LISTED BY IARC, NTP, OR OSHA AS A CARCINOGEN.
Effects of Overexposure:POSSIBLE SKIN IRRITATION OR SENSITIZATION, EYE
    IRRITATION
Medical Cond Aggravated by Exposure:ANY RESPIRATORY OR SKIN CONDITION.

=======================  First Aid Measures  =======================

First Aid:EYE:FLUSH W/ WATER 15 MIN HOLD LIDS OPEN. SEE A DOCTOR.
    SKIN:REMOVE CONTAMINATED CLOTHING AND LAUNDER BEFORE  REUSE.  WASH
    WITH SOAP & WATER, ALCOHOL, OR HAND CLEANER. INHALATION:PRODUCT IS
    NOT VOLATI LE AND THUS NO PROBLEM AT NORMAL TEMPERATURE.
    INGESTED:UNLIKELY, BUT IF OCCURRING, GET IMMEDIATE MEDICAL CARE. 
    IF IRRITATION PERSISTS,OR IS SEVERE,SEE A DOCTOR.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TOC
Flash Point:200F/93.3C
Extinguishing Media:USE CARBON DIOXIDE, FOAM, DRY CHEMICAL, OR WATER
    FOG.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
    FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE. USE WATER
    SPRAY TO COOL NEARBY CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:FIRE OR EXCESSIVE HEAT MAY CAUSE
    PRODUCTION OF DENSE SMOKE AND/OR TOXIC GASSES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WIPE UP OR ABSORB ON SUITABLE MATERIAL AND
    SHOVEL UP. AVOID ALL PERSONAL CONTACT. CLEAN AREA WITH SOLVENT
    OBSERVING ANY FLAMMABILITY OF THE SOLVENT.
Neutralizing Agent:NONE. SOLVENT; ALCOHOL

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL AREA PER LABEL
    INSTRUCTIONS. MAY BE STORED AT ROOM TEMPERATURE (77F) FOR 12
    MONTHS.
Other Precautions:FOLLOW RECOMMENDED CURING SCHEDULE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT NORMALLY REQUIRED. WEAR APPROPRIATE,
    PROPERLY FITTED RESPIRATOR (NIOSH/MSHA APPROVED FOR ORGANIC
    VAPORS/MISTS) IF EXPOSED ABOVE PEL/TLV.
Ventilation:USE OF LOCAL EXHAUST RECOMMENDED BY MFR.
Protective Gloves:IMPERVIORS; RUBBER OR PLASTIC
Eye Protection:SAFETY GLASSES OR SPLASH GOGGLES
Other Protective Equipment:AS NECESSARY TO AVOID PROLONGED AND/OR
    REPEATED CONTACT.
Work Hygienic Practices:USE GOOD CHEMICAL HYGIENE PRACTICE. AVOID ANY
    UNNECESSARY CONTACT.
Supplemental Safety and Health
THIS IS PART A OF A TWO PART PRODUCT.

==================  Physical/Chemical Properties  ==================

HCC:V7
Boiling Pt:B.P. Text:284F/140C
Vapor Pres:< 2 MM
Vapor Density:3.8
Spec Gravity:1.15
Evaporation Rate &amp; Reference:>1.0 (BUAC)
Solubility in Water:<1%
Appearance and Odor:TRANSLUCENT, THIXOTROPIC LIQ, W/ SWEET, ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, MINERAL ACIDS
Stability Condition to Avoid:NONE REPORTED
Hazardous Decomposition Products:CARBON MONOXIDE,CARBON DIOXIDE,
    NITROGEN OXIDES,ALDEHYDES, ACIDS, OTHER MISCELLANEOUS ORGANIC
    COMPOUNDS
Conditions to Avoid Polymerization:AVOID MIXING IN BATCHES GREATER THAN
    ONE POUND.	DO NOT HEAT ABOVE 75F UNLESS CURING SURFACES TO BE
    BONDED.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE I/A/W FEDERAL,STATE,LOCAL REGULATIONS.
    HMIS SUGGESTS INCINERATION. DO NOT INCINERATE CLOSED CONTAINERS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.