3M COMPANY -- SCOTCHWELD 1469 EPOXY ADHESIVE  -- 8040-00-062-2185
<pre>=====================  Product Identification  =====================

Product ID:SCOTCHWELD 1469 EPOXY ADHESIVE
MSDS Date:01/01/1987
FSC:8040
NIIN:00-062-2185
MSDS Number: BCWSX
=== Responsible Party ===
Company Name:3M COMPANY
Emergency Phone Num:612-733-1110 OP 55
CAGE:76381
=== Contractor Identification ===
Company Name:3M MINNESOTA MINING AND MFG CO ADHESIVES SEALERS DIV
Address:3M CTR
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:800-364-3577/651-737-6501(24 HOURS)
CAGE:04963
Company Name:MINNESOTA MINING AND  MFG CO, DBA 3M
Address:3M CENTER BLDG 224-5S-04
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:866-556 5712 / 612-733-1110
CAGE:76381

=============  Composition/Information on Ingredients  =============

Ingred Name:EPICHLOROHYDRIN/BISPHENOL A EPOXY RESIN (ANSI CLASS II)
Fraction by Wt: 73%

Ingred Name:AMORPHOUS FUSED SILICA (WHEN COMBINED WITH CURATIVE- 27% OF
    PRODUCT)
RTECS #:VV7320000
ACGIH TLV:20 MPPCF

Ingred Name:CURATIVE

=====================  Hazards Identification  =====================

Effects of Overexposure:EYE, SKIN & GASTROINTESTINAL IRRITATION.
    POSSIBLE SKIN SENSITIZATION IN SOME INDIVDUALS.

=======================  First Aid Measures  =======================

First Aid:EYE: FLUSH 10 MIN W/COPIOUS WATER. SKN: WASH WSOAP & WATER.
    LAUNDER CONTAM CLOTHING BEFORE REUSE. INGES, INHL: NO ACTION
    INDICATED.

=====================  Fire Fighting Measures  =====================

Flash Point:>200F; 93C
Extinguishing Media:CO*2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:USE SCBA WHEN FIGHTING FIRES INVOLVING THIS
    MATERIAL.
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:COLLECT SPILLED MATERIAL. PLACE IN METAL
    CONTAINER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID EYE & SKN CONTACT. AVOID INHL &
    EYE CONTACT WITH DUST & PARTICULATES FROM GRINDING OR SAWING OF
    CURED PRODUCT.
Other Precautions:AVOID EYE CONTACT, PROLONGED SKIN CONTACT &
    INHALATION OF DUST FROM GRINDING CURED ADHESIVE.

=============  Exposure Controls/Personal Protection  =============

Ventilation:EXHAUST ALL CURING OVENS TO OUTDOORS
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES
Other Protective Equipment:USE DUST MASK WHEN GRINDING CURED PRODUCT
Supplemental Safety and Health
UPDATE PER 3M MSDS(OSHA) 1 NOV 85, DOC # 1031236. 3M GENERIC
    ID#:62-1469-XXXX-X.FORMER P/N:SCOTCHWELD EC-1469 STRUCTURAL
    ADHESIVE.

==================  Physical/Chemical Properties  ==================

HCC:N1
Spec Gravity:1.2
Solubility in Water:NIL
Appearance and Odor:VISCOUS CREAM COLORED LIQUID W/ LOW ODOR.
Percent Volatiles by Volume:0

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO, CO*2, SMOKE WHEN SUBJECTED TO
    EXCESSIVE HEAT OR FLAME.

====================  Disposal Considerations  ====================

Waste Disposal Methods:MANUFACTURER RECOMMEND COMMERCIAL INCINERATION
    WITH DESTRUCTION & REMOVAL EFFICIENCY AT 100%. OTHERWISE, DISPOSE
    IN LANDFILL OR MUNICIPAL REFUSE INCINERATOR. DISPOSAL METHODS MUST
    BE IAW FEDERAL, STAT E & LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.