CRAWFORD LABORATORIES, INC. -- EPOXY COATING, WHITE 17925 COMP I M1-036  -- 8010-00-082-2440
<pre>=====================  Product Identification  =====================

Product ID:EPOXY COATING, WHITE 17925 COMP I M1-036
MSDS Date:10/20/1987
FSC:8010
NIIN:00-082-2440
Kit Part:Y
MSDS Number: BCXYN
=== Responsible Party ===
Company Name:CRAWFORD LABORATORIES, INC.
Address:4165 SOUTH EMERALD AVENUE
City:CHICAGO
State:IL
ZIP:60609
Country:US
Info Phone Num:312-376-7132
Emergency Phone Num:312-433-1307
CAGE:DO165
=== Contractor Identification ===
Company Name:CRAWFORD LABORATIES, INC
Address:4165 SOUTH EMERALD AVENUE
City:CHICAGO
State:IL
ZIP:60609
Phone:800-424-9300 CHEMTREC
CAGE:DO165
Company Name:CRAWFORD LABORATORIES, INC
Address:4165 SOUTH EMERALD AVENUE
Box:City:CHICAGO
State:IL
ZIP:60609
Country:US
Phone:312-376-7132
CAGE:5V430

=============  Composition/Information on Ingredients  =============

Ingred Name:AROMATIC SOLVENT
CAS:108-88-3
RTECS #:SX5250000
Fraction by Wt: 5-20%
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:ACETATE
CAS:108-65-6
RTECS #:AI8925000
Fraction by Wt: 1-5%
OSHA PEL:150 PPM

Ingred Name:GLYCOL ETHER, ALIPHATIC (1-METHOXY-2-PROPANOL CAS
    #107-98-297%, 2-METHOXY-1-PROPANOL CAS #1589-47-5 3%)
RTECS #:MC4805000
Fraction by Wt: 1-5%
ACGIH TLV:100 PPM

Ingred Name:METHYL ETHYL KETONE (2-BUTANONE) (MEK)  (SARA III)
CAS:78-93-3
RTECS #:EL6475000
Fraction by Wt: 5-20%
OSHA PEL:200 PPM/300 STEL
ACGIH TLV:200 PPM/300STEL 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Health Hazards Acute and Chronic:TOXICITY MAY CAUSE HEADACHE,
    DIZZINESS, NAUSEA, AND LOSS OF CONSCIOUSNESS. EYE IRRITATON,
    IRRITATED MUCOUS MEMBRANES, VOMITING DUE TO INGESTION, DEFATTING
    AND DRYING OF THE SKIN.
Effects of Overexposure:OVEREXPOSURE MAY PRODUCE VARIOUS EFFECTS-ACUTE
    TOXICITY, EYE IRRITATION, IRRITATED MUCOUS MEMBRANES, VOMITING,
    SKIN IRRITATION & DERMATITIS.

=======================  First Aid Measures  =======================

First Aid:DO NOT INDUCE VOMITING, EYE CONTACT-FLUSH EYES WITH WATER FOR
    15 MINUTES, INHALATION-REMOVE VICTIM TO FRESH AIR AND PROVIDE
    OXYGEN IF NECESSARY. KEEP VICTIM QUIET. SKIN CONTACT-FLUSH WITH
    WATER-REMOVE  CONTAMINATED CLOTHING, WASH WITH SOAP AND WATER. GET
    MEDICAL ATTENTION IMMEDIATELY.

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:55F/ 12.78C
Lower Limits:1.2
Extinguishing Media:FOAM, CO2, OR DRY CHEMICAL
Fire Fighting Procedures:WATER MAY BE USED TO KEEP EXPOSED CONTAINERS
    COOL AND TO KEEP FLAMMABLE STRUCTURES WET. DO NOT ENTER FIRE AREA
    W/O PROPER PROTECTION.
Unusual Fire/Explosion Hazard:SEALED CONTAINERS MAY EXPLODE IF
    OVERHEATED. WATER PRESSURE MAY SPREAD A FLAMMABLE LIQUID FIRE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. HANDLING
    EQUIPMENT MUST BE GROUNDED TO PREVENT SPARKING. SOAP UP WITH AN
    ABSORBENT AND PLACE IN NON-LEAKING CONTAINERS. SEAL TIGHTLY FOR
    PROPER DISPOSAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:TREAT AS A HAZARDOUS-FLAMMABLE
    MATERIAL. KNOW APPLICABLE DOT REGULATIONS BEFORE ATTEMPTING TO
    TRANSPORT THIS MATERIAL.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:MUST PROVIDE ADEQUATE VENTILATION TO KEEP VAPOR
    CONCENTRATIONS BELOW ESTABLISHED TLV LIMIT. IN MORE CONFINED AREAS
    A NIOSH-MSHA APPROVED RESPIRATOR EQUIPPED WITH ORGANIC VAPOR
    CARTRIDGE SHOULD BE WORN .
Ventilation:MUST PROVIDE ADEQUATE VENTILATION.
Protective Gloves:RUBBER GLOVES
Eye Protection:APPROVED SAFETY GOGGLES AND FACESHIELD
Other Protective Equipment:HAVE EYE BATH AVAILABLE
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:124-243F
Vapor Density:>AIR
Evaporation Rate &amp; Reference:1.55 X N-BUTYL ACETATE
Appearance and Odor:WHITE LIQUID
Percent Volatiles by Volume:36.4

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS AND STRONG ALKALIES.
Stability Condition to Avoid:AVOID HEAT, SPARKS, OPEN FLAMES AND
    INCOMPATIBILITIES ABOVE HIGH TEMPERATURE, STRONG OXIDIZING
    CONDITIONS.
Hazardous Decomposition Products:INCOMPLETE COMBUSTION FOR PRODUCTS
    LIKE THIS MAY GENERATE HIGHLY POISONOUS CARBON MONOXIDE AND OTHER
    TOXIC GASES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH CURRENT LOCAL, STATE
    AND FEDERAL REGULATION. CONTACT AN APPROVED DISPOSAL FACILITY.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.