RAM CHEMICALS DIVISION -- MOLD RELEASE 225 ID 187X26-10 -- 8030-01-064-4951
=====================  Product Identification  =====================

Product ID:MOLD RELEASE 225 ID 187X26-10
MSDS Date:12/04/1989
FSC:8030
NIIN:01-064-4951
MSDS Number: BHNCJ
=== Responsible Party ===
Company Name:RAM CHEMICALS DIVISION
Address:210 EAST ALONDRA BLVD.
City:GARDENA
State:CA
ZIP:90248
Country:US
Info Phone Num:213-321-0710
Emergency Phone Num:213-321-0710
CAGE:HO067
=== Contractor Identification ===
Company Name:RAM CHEMICALS DIV.  WHITTAKER CORP.
Address:210 E ALONDRA BLVD
Box:City:GARDENA
State:CA
ZIP:90248-2808
Country:US
CAGE:HO067
Company Name:RAM CHEMICALS, WHITTAKER DIV/LILLY INDUSTRIES INC
Address:210 E ALONDRA BLVD
Box:City:GARDENA
State:CA
ZIP:90248-2808
Country:US
Phone:310-352-3087/800-424-9300(CHEMTREC)
CAGE:22401

=============  Composition/Information on Ingredients  =============

Ingred Name:VM&P NAPHTHA					       
    (VAPOR PRESSURE 38 MM HG @ 68 F)
CAS:64742-89-8
Fraction by Wt: 60-80%
OSHA PEL:500 PPM
ACGIH TLV:500 PPM

Ingred Name:ISOPROPYL ALCOHOL  (SARA III)
CAS:67-63-0
RTECS #:NT8050000
Fraction by Wt: 20-30%
OSHA PEL:400 PPM/500 STEL
ACGIH TLV:400 PPM/500STEL;9192

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Health Hazards Acute and Chronic:REPEATED AND EXCESSIVE EXPOSURE TO
    VAPORS MAY CAUSE KIDNEY, LIVER, OR LUNG	 DAMAGE.  HIGH
    EXPOSURES CAUSE NARCOSIS AND AN INCREASE OF CARBON MONOXIDE IN
    THEBLOOD STREAM.  DELIBERATE CONCENTRATION	AND INHALING THE
    CONTENTS CAN BE HARMFULOR FATAL.
Effects of Overexposure:EYES:  MAY CAUSE SEVERE IRRITATION OR BURNS.   
				    SKIN:  MAY CAUSE MODERATE
    IRRITATION (SKIN RASH/DERMATITIS).			  INHALATION: 
    EXCESSIVE BREATHING OF VAPO RS CAN CAUSE RESPIRATORY
    IRRITATION,NAUSEA AND EVEN ASPHYXIATION.
Medical Cond Aggravated by Exposure:PERSONS WITH A HISTORY OF
    CARDIOVASCULAT DISEASE SHOULD AVOID BREATHING THE VAPORS.

=======================  First Aid Measures  =======================

First Aid:EYES:  FLUSH WITH LARGE AMOUNTS OF WATER.  GET MEDICAL
    ATTENTION.		     SKIN:  WASH WITH SOAP AND WATER.  GET
    MEDICAL ATTENTION.			      INHALATION:  REMOVE TO
    FRESH AIR.	IF BR EATHING HAS STOPPED, GIVE ARTIFICIALRESPIRATION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:23F/-5C
Lower Limits:1.2
Upper Limits:12.0
Extinguishing Media:ALCOHOL FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:CLOSED CONTAINERS MAY BE COOLED BY WATER.
Unusual Fire/Explosion Hazard:VAPORS MAY TRAVEL ALONG GROUND TO SOURCES
    OF IGN, CAUSING FIRE FLASHBACK.  NEVERUSE WELDING TORCH NEAR
    DRUM(EVEN IF EMPTY) AS RESIDUES CAN IGNITE EXPLOSIVELY.

==================  Accidental Release Measures  ==================

Spill Release Procedures:VENTILATE THE AREA.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AWAY FROM SOURCES OF HEAT OR
    IGNITION
Other Precautions:FOR INDUSTRIAL USE ONLY.  KEEP OUT OF REACH OF
    CHILDREN.  CONTENTS UNDER PRESSURE, EXPOSURE TO HEAT MAY BURST
    CONTAINERS.  KEEP AWAY FROM RADIATORS, STOVES OR  DIRECT SUNLIGHT. 
    DO NOT PUNCTURE OR INC INERATE CAN, EVEN WHEN EMPTY.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF TLV IS EXCEEDED USE CHEMICAL RESPIRATOR WITH
    AN ORGANIC VAPOR CARTRIDGE OR ANAIR-SUPPLIED RESPIRATOR WITH
    SELF-CONTAINED BREATHING APPARATUS.
Ventilation:LOCAL EXHAUST SUFFICIENT TO KEEP VAPORS BELOW TLV.
Protective Gloves:NITRILE RUBBER
Eye Protection:GOGGLES
Other Protective Equipment:NOT USUALLY NEEDED
Work Hygienic Practices:WASH HANDS BEFORE EATING OR SMOKING
Supplemental Safety and Health
NK

==================  Physical/Chemical Properties  ==================

HCC:V3
Boiling Pt:B.P. Text:180F-220F
Vapor Pres:38 MM HG
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:94.38

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE KNOWN
Stability Condition to Avoid:SOURCES OF IGNITION
Hazardous Decomposition Products:POSSIBLY CARBON MONOXIDE, HALOGEN
    ACIDS
Conditions to Avoid Polymerization:SOURCES OF IGNITION

====================  Disposal Considerations  ====================

Waste Disposal Methods:FOLLOW EPA HAZARDOUS WASTE REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.