PRATT AND LAMBERT INC -- PRIM EPOXY CTG CORRINHIB LD CHR FR ID724701  -- 8010-01-193-0516
<pre>=====================  Product Identification  =====================

Product ID:PRIM EPOXY CTG CORRINHIB LD CHR FR ID724701
MSDS Date:10/15/1987
FSC:8010
NIIN:01-193-0516
Kit Part:Y
MSDS Number: BHYLJ
=== Responsible Party ===
Company Name:PRATT AND LAMBERT INC
Address:16116 E 13TH ST
Box:2153
City:WICHITA
State:KS
ZIP:67201
Country:US
Info Phone Num:316-733-1361
Emergency Phone Num:316-733-1361
Preparer's Name:W.A. ELLISON
CAGE:61196
=== Contractor Identification ===
Company Name:PRATT AND LAMBERT INC
Box:6027
City:CLEVELAND
State:OH
ZIP:44101-1027
Country:US
Phone:216-566-2902
CAGE:61196

=============  Composition/Information on Ingredients  =============

Ingred Name:N-BUTYL ALCOHOL (SARA III)
CAS:71-36-3
RTECS #:EO1400000
OSHA PEL:100 PPM
ACGIH TLV:S, C 50 PPM; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:PROPYLENE GLYCOL MONOETHYL ETHER
CAS:111-35-3
RTECS #:UJ2650000

Ingred Name:TOLUENE (SARA III)
CAS:108-88-3
RTECS #:XS5250000
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:DIETHYLENE TRIAMINE
CAS:111-40-0
RTECS #:IE1225000
OSHA PEL:1 PPM
ACGIH TLV:S, 1 PPM; 9192

Ingred Name:PROPYLENE GLYCOL MONOMETHYL ETHER
CAS:107-98-2
RTECS #:UB7700000
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150STEL;9192

Ingred Name:VOC. ORGANIC CMPD 5.7 LB/GL LESS WATER & NPRS 684 G/L
    LESSWATER VOC 20.6 LB/GAL SOLIDS 2472 G/L SOLIDS CALCULATED.
RTECS #:9999999VO

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SWALLOWING: CAN CAUSE GASTROINTESTINAL
    IRR/ NAUSEA/VOMIT. ASPIRATION OF MAT'L MAYCAUSE CHEM PNEUMONITIS.
    INHALATION: NOSE/THROAT IRRITA. HIGH CONCENTRATION MAY CAUSE
    CENTRAL NERVOUS SYSTEM DEPRESSION  CHAR BY
    HEADACHES/DIZZINESS/NAUSEA/ CONFUSION. EYE: MAY CAUSE EYE IRR.
    SKIN: MAY CAUSE DEFATTING AND IRRITATION.
Effects of Overexposure:REPORTS HAVE ASSOCIATED PROLONGED AND REPEATED
    OCCUPATIONAL OVEREXPOSURE TO SOL-VENTS WITH PERMANENT BRAIN AND
    NERVOUS SYSTEM DAMAGE. INTENTIONAL MISUSE BY DELIBERATELY
    CONCENTRATING AND INHALING THE  CONTENTS MAY BE HARMFUL OR FATAL.
    OVEREXPOSURE TO TOLUENE MAY CAUSE LIVER DAMAGE AND CONTACT MAY
    CAUSE DERMATITIS.

=======================  First Aid Measures  =======================

First Aid:SWALLOWING: GET MEDICAL ATTENTION IMMEDIATELY. INHALATION:
    REMOVE TO FRESH AIR. IF BREATHING HAS STOPPED GIVE CPR. GET MED
    ATTN. EYE: FLUSH W/WATER FOR 15 MIN LIFTING UPPER/LOWER LIDS. GET
    MED ATTN. S KIN: REMOVE CONTAMINATED CLOTHING. WASHAFFECTED AREA.
    OBTAIN MED ATTN IF IRR'N PERSISTS. TREATMENT REQ FOR OVER- EXPOSURE
    S/B DIRECTED AT THE CONTROL OF SYMPTOMS AND THE CLINICAL
    CONDITIONS.

=====================  Fire Fighting Measures  =====================

Flash Point:40F 4.44C
Extinguishing Media:USE NFPA CLASS B FIRE EXTINGUISHERS. POLYMER FOAM
    IS PREFERRED FOR LARGE FIRES.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS. WATER
    TO COOL CONT TO PREVENT POSSIBLE AUTO-IGNITION OR EXPLOSION. IF
    WATER IS USED, FOG NOZZLES ARE PREFERABLE.
Unusual Fire/Explosion Hazard:DURING EMERGENCY CONDITIONS, OVEREXPOSURE
    TO DECOMPOSITION PRODUCTS MAY CAUSE A HEALTH HAZARD. SYMP MAY NOT
    BE IMMED APPARENT. GET MED ATTN. WARNING! FLAMMABLE

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIM ALL IGNITION SOURCES. DIKE/CONTAIN SPILL
    WITHINERT MAT'L. TRANSFER LIQ'S/ABSORBENT DIKING MAT'LIN COVERED
    METAL CONT'S FOR RECOVERY/DISPOSAL. USEONLY NON-SPARKING TOOLS.
    PREVENT CONTAM OF SEWERS/ STREAMS/GROUNDWATER W/SPILLED MAT'L/USED
    ABSORBENT

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 90 DEGREES F.
Other Precautions:AVOID SKIN CONTACT. DO NOT REUSE EMPTY CONT. DO NOT
    TAKE INTERN. CONT'ER S/B GROUNDED AND BONDED TO THE RECEIVING
    CONTAINER. DO NOT WELD/BRAZE OR CUT CONT'R.NEVER USE PRESSURE TO
    EMPTY. DRUM IS NOT A  PRESSURE VESSEL. CLOSE AFTER EA USE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WELL VENTILATED AREA-USE NIOSH MECHANICAL FILTER
    RESPIRATOR. RESTRICTED VENTIL- USE A NIOSH (COMBINATION CHEM
    CARTRIDGE/ MECHAN FILTER) RESP. IN CONFINED AREAS USE NIOSH
    APPROVED AIR-SUPPLIED RESPIRAT OR. SEE OSHA 29 CFR 1910.134.
Ventilation:PROVIDE DILUT/LOCAL EXH VENT TO KEEP CONCENT OF HAZ INGRID
    BELOW EXPOSURE LMT STD. REMOVE PROD GEN-WELD/CUT/BRAZ OBJECT
Protective Gloves:SOLVENT IMPERMEABLE GLOVES.
Eye Protection:WEAR SAFETY SPECTACLES.
Other Protective Equipment:EYEWASH FACILITY, SAFETY SHOWER.
Work Hygienic Practices:WASH WITH SOAP AND WATER HANDS/FACE THROUGHLY
    BEFORE EATING OR DRINKING.
Supplemental Safety and Health
NK

==================  Physical/Chemical Properties  ==================

HCC:F2
Boiling Pt:B.P. Text:231F 405F
Vapor Density:>AIR
Evaporation Rate &amp; Reference:SLOWER THAN ETHER.
Percent Volatiles by Volume:72

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:NO
STRONG ACIDS OR ALKALINE MATERIALS. OXIDIZING MATERIALS. ACCELERATORS.
Stability Condition to Avoid:AVOID EXCESSIVE HEAT AND SOURCES OF
    IGNITION.
Hazardous Decomposition Products:BURNING, INCLUDING WHEN HEATED BY
    WELDING OR CUTTING, WILL PRODUCE SMOKE, CARBON MONOXIDE AND CARBON
    DIOXIDE.
Conditions to Avoid Polymerization:KEEP AWAY FROM HEAT, SPARKS AND
    FLAME.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE ONLY IN EPA PERMITTED FACILITY.
    DISPOSEONLY IAW FED/STATE/LOCAL REGS. DO NOT INCINERATE CLOSED
    CONTAINERS. OBSERVE PRECAUTIONS FOR DIS- POSAL OF FLAMMABLE MAT'S.
    CONTAMINATED ABSORBENT MAY	BE DISPOSED IN A HAZARDOUS WASTE
    LANDFILL.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.