PROTECTIVE COATING COMPANY -- PC-7 EPOXY/POLYAMIDE HARDNER,PART B  -- 8010-00N010711
<pre>=====================  Product Identification  =====================

Product ID:PC-7 EPOXY/POLYAMIDE HARDNER,PART B
MSDS Date:02/01/1987
FSC:8010
NIIN:00N010711
MSDS Number: BHYRZ
=== Responsible Party ===
Company Name:PROTECTIVE COATING COMPANY
Address:1341 N VAN BUREN ST
City:ALLENTOWN
State:PA
ZIP:18103
Info Phone Num:215-432-3543
Emergency Phone Num:215-432-3543
CAGE:FO146
=== Contractor Identification ===
Company Name:PROTECTIVE COATING CO/ALLENTOWN, PA 18103
CAGE:FO146

=============  Composition/Information on Ingredients  =============

Ingred Name:CARBON BLACK
CAS:1333-86-4
RTECS #:FF5800000
Fraction by Wt: <0.005%
Other REC Limits:N/K 
OSHA PEL:3.5 MG/M3
ACGIH TLV:3.5 MG/M3; 9192

Ingred Name:CALCIUM SULFATE
CAS:7778-18-9
RTECS #:WS6920000
Fraction by Wt: 7-11%
Other REC Limits:N/K 
OSHA PEL:15 MG/M3 TOTAL DUST
ACGIH TLV:10 MG/M3 TDUST; 9192

Ingred Name:CALCIUM METASILICATE
CAS:10101-39-0
RTECS #:VV9170000
Fraction by Wt: 10-15%
Other REC Limits:N/K 
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:GLASS BUBBLES
Fraction by Wt: 4-8%
Other REC Limits:N/K 
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:CELLULOSIC FIBERS
Fraction by Wt: 2-4%
Other REC Limits:N/K 
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:EPOXY/POLYAMIDE HARDNER
Fraction by Wt: 50-60%
Other REC Limits:N/K 
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:HYDROCARBON RESINS AND PLASTICIZERS.
Fraction by Wt: 14-20%
Other REC Limits:N/K 
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:N/K 
Routes of Entry: Inhalation:NO	Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SKIN SENSITIZATION POSSIBLE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES/INGESTION/INHALATION:N/K .SKIN:MODERATE
    SKIN IRRITATION OR SENSITIZATION POSSIBLE.UNCURED RESINS & HARDNERS
    COULD POSSIBLY PRODUCE IRRITATION,RASH,OR ASTHMATIC-TYPE RESPONSE
    IN SENSITI ZED PERSONS WITH FREQUENT AND PROLONGEDCONTACT WITH THE
    SKIN.
Medical Cond Aggravated by Exposure:N/K 

=======================  First Aid Measures  =======================

First Aid:EYES:FLUSH WITH WATER FOR AT LEAST 15 MINUTES.GET MEDICAL
    ATTENTION.SKIN:WASH WITH SOAP AND WATER.INGESTION:CALL MD
    IMMEDIATELY .INHALATION:REMOVE TO FRESH AIR.SUPPORT BREATHING (GIVE
    O*2/ARTIFI CIAL RESPIRATION) .

=====================  Fire Fighting Measures  =====================

Flash Point:>200F,93.33C
Lower Limits:N/K 
Upper Limits:N/K 
Extinguishing Media:FOAM,CO*2,DRY CHEMICAL,WATER.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT .DURING A FIRE,IRRITATING GASES FROM
    DECOMPOSITION MAY BE PRESENT.
Unusual Fire/Explosion Hazard:NONE.HAZARDOUS DECOMPOSITION
    PRODUCTS:IRRITATING GASES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:N/K 
Neutralizing Agent:N/K 

======================	Handling and Storage  ======================

Handling and Storage Precautions:ALL PERSONNEL MUST MAINTAIN STRICT
    CLEANLINESS BOTH OF THEIR PERSON AND WORK AREA.AVOID CONTACT W/
    EYES,SKIN,CLOTHING,AVOID BREATHING VAPORS.
Other Precautions:DO NOT TAKE INTERNALLY.CLOTHING CONTAMINATED MUST BE
    THOROUGHLY WASHED BEFORE USING.HAND & OTHER SKIN AREAS COMING IN
    CONTACT W/ RESINS & HARDNERS MUST BE THOROUGHLY WASHED W/ SOAP OR
    APPROVED HAND CL EANER.NEVER USE SOLVENTS TO CLEAN SKIN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN .AVOID BREATHING DUST FROM SANDING OR GRINDING
    CURED ADHESIVES.
Ventilation:LOCAL AND GENERAL VENTILATION NECESSARY TO KEEP AIR
    CONCENTRATION BELOW TLV .
Protective Gloves:IMPERVIOUS
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE USUALLY REQUIRED.
Work Hygienic Practices:THOROUGHLY WASH CONTAM CLTHG.THOROUGHLY WASH
    HANDS,OTHER SKIN W/ SOAP,APPRVD CLEANER.NEVER USE SOLVENTS TO CLEAN
    SKIN.
Supplemental Safety and Health
ROUTES OF ENTRY:INHALATION/SKIN/INGESTION .

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:DECOMPOSES
Melt/Freeze Pt:M.P/F.P Text:N/K 
Decomp Temp:Decomp Text:N/K 
Vapor Pres:N/K 
Vapor Density:>1 (AIR=1)
Spec Gravity:1.08 (WATER=1)
Evaporation Rate &amp; Reference:N/K 
Solubility in Water:N/K 
Appearance and Odor:N/K 
Percent Volatiles by Volume:NONE

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:N/K 
Hazardous Decomposition Products:IRRITATING GASES
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
    FEDERAL,STATE AND LOCAL REGULATIONS .

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.