DOW CORNING CORP -- SILASTIC 732 RTV SEALANT-CLEAR -- 8030-00-538-5212
=====================  Product Identification  =====================

Product ID:SILASTIC 732 RTV SEALANT-CLEAR
MSDS Date:11/07/1985
FSC:8030
NIIN:00-538-5212
MSDS Number: BJMYX
=== Responsible Party ===
Company Name:DOW CORNING CORP
Address:3901 SOUTH SAGINAW ROAD
Box:997
City:MIDLAND
State:MI
ZIP:48640
Country:US
Info Phone Num:517-496-4000
Emergency Phone Num:517-496-5900
Preparer's Name:JACK L SHENEBERGER
CAGE:5D028
=== Contractor Identification ===
Company Name:DOW CORNING CORP
Address:3901 S SAGINAW RD
Box:997
City:MIDLAND
State:MI
ZIP:48686-0997
Country:US
Phone:517-496-6000/517-496-6315
CAGE:5D028
Company Name:DOW CORNING CORP
Address:2200 W SALZBURG RD
Box:City:AUBURN
State:MI
ZIP:48611
Country:US
Phone:517-496-4388
CAGE:71984
Company Name:ESSEX GROUP INC
Address:1601 WALL ST
Box:1601
City:FORT WAYNE
State:IN
ZIP:46801-1601
Country:US
Phone:219-461-4000
CAGE:72983

=============  Composition/Information on Ingredients  =============

Ingred Name:ACETOXYSILANE. TLV/PEL BASED ON ACETIC ACID (MFR).
Fraction by Wt: 5%
OSHA PEL:10 PPM
ACGIH TLV:10 PPM; 15 PPM STEL

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYES:MAY IRRI W/SLIGHT PAIN,REDNESS &
    POSS MINOR CORNEAL INJURY.SKIN:A SINGLE EXPOS FOR SEVERAL HOURS MAY
    CAUSE SLIGHT REDDENING.LONGER/RPTD CONTACT MAY CAUSE MOD IRRIT &
    POSS A MILD BURN. INHAL: NO E FTS EXCEPT VERY SLIGHT IRRIT/PAIN TO
    THE EYE OR RESP PASSAGES. INGEST: AMTS TRANSFERRED TO THE (SEE SIGN
    & SYMP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: MOUTH BY FINGERS, ETC, DURING NORMAL
    OPERATIONS SHOULD NOT CAUSE INJURY. SWALLOWING SUBSTANTIAL AMTS MAY
    CAUSE SOME INJURY. COMMENT: NO KNOWN AVERSE CHRONIC HLTH EFTS, BUT
    UNNECESSARY EXPOS  SHOULD BE AVOIDED. THIS PROD MAY ENHANCE
    ALLERGIC CONDITIONS ON CERTAIN PEOPLE.
Medical Cond Aggravated by Exposure:NONE KNOWN TO MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH WITH WATER FOR 15 MINUTES. GET MD IMMED. SKIN:
    WIPE OFF AND FLUSH WITH WATER. INHAL: REMOVE TO FRESH AIR. GET MD
    IMMED. INGEST: GET MD IMMED.

=====================  Fire Fighting Measures  =====================

Flash Point Method:OC
Flash Point:>250F,>121C
Extinguishing Media:WATER FOG, CO*2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRES.
Unusual Fire/Explosion Hazard:NOT KNOWN TO MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE PRODUCT AND USE ABSORBENT MATERIAL TO
    TAKE CARE OF ANY OIL-LIKE RESIDUES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE BELOW 90F/32C. USE REASONABLE
    CARE AND CAUTION.
Other Precautions:NONE KNOWN TO MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED ACID GAS/ORGANIC VAPOR TYPE
    RESPIRATOR UNLESS LOCAL EXHAUST VENT IS ADEQUATE OR AIR SAMPLING
    DATA SHOWS EXPOSURES ARE WITHIN TLV, PEL GUIDELINES.
Ventilation:MECHANICAL (GENERAL) RECOMMENDED.
Protective Gloves:RUBBER OR PLASTIC GLOVES
Eye Protection:CHEMICAL WORKERS GOGGLES
Other Protective Equipment:RUBBER OR PLASTIC APRONS, BOOTS, ETC.
Work Hygienic Practices:WASH AT MEALTIME, AT END OF SHIFT AND BEFORE
    SMOKING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>300F,>149C
Vapor Pres:<5 MM @77F
Spec Gravity:1.05 @ 77F
Evaporation Rate & Reference:<1 (ETHER=1)
Solubility in Water:<0.1%
Appearance and Odor:ACETIC ACID-LIKE, PASTE, CLEAR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL CAN CAUSE A REACTION.
Stability Condition to Avoid:AIR OR MOISTURE CAUSES POLYMERIZATION AND
    ACETIC ACID VAPORS ARE FORMED.
Hazardous Decomposition Products:SILICON DIOXIDE, CARBON DIOXIDE, AND
    TRACES OF INCOMPLETELY BURNED CARBON PRODUCTS

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH ALL LOCAL, STATE AND
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.