H B FULLER CO -- EPOXY CURING AGENT, FE-3026-B  -- 8010-00N020838
<pre>=====================  Product Identification  =====================

Product ID:EPOXY CURING AGENT, FE-3026-B
MSDS Date:12/12/1988
FSC:8010
NIIN:00N020838
MSDS Number: BLJBH
=== Responsible Party ===
Company Name:H B FULLER CO
Address:1200 WOLTERS BLVD
City:VADNAIS HEIGHTS
State:MN
ZIP:55110
Country:US
Info Phone Num:612-481-3300
Emergency Phone Num:612-481-3300
Preparer's Name:INDUSTRIAL HYGIENE
CAGE:0HD19
=== Contractor Identification ===
Company Name:H B FULLER CO
Address:1200 WOLTER BLVD
Box:City:VADNAIS HEIGHTS
State:MN
ZIP:55110
Country:US
Phone:612-481-3300
CAGE:0HD19

=============  Composition/Information on Ingredients  =============

Ingred Name:ETHANOLAMINE
CAS:141-43-5
RTECS #:KJ5775000
Fraction by Wt: 1-10%
OSHA PEL:3 PPM/6 STEL
ACGIH TLV:3 PPM/6 STEL; 9192

Ingred Name:POLYAMIDE RESIN
Fraction by Wt: >10%

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES:STRONG IRRITANT. SKIN:WILL
    CAUSE SEVERE IRRITATION. STRONG DERMAL SENSITIZER. INHAL:MAY CAUSE
    RESPIRATORY IRRITATION. CHRONIC:NO ANTICIPATED EFFECTS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NO KNOWN EFFECTS ON OTHER
    ILLNESSES.

=======================  First Aid Measures  =======================

First Aid:EYES:FLUSH IMMEDIATELY WITH LARGE AMOUNT OF WATER FOR AT
    LEAST 15 MINUTES. CALL MD. SKIN:WASH AFFECTED AREA WITH SOAP AND
    WATER. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE. INHAL:REMOVE
    FROM EXPOSURE.  RESTORE BREATHING IF NECESSARY (GIVE O2/ARTIFICIAL
    RESPIRATION). KEEP WARM AND QUIET. CALL MD. INGEST:CALL MD
    IMMEDIATELY .

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:>200F,93C
Lower Limits:ING 1
Extinguishing Media:WATER SPRAY, FOAM, DRY CHEMICAL OR CARBON DIOXIDE.
Fire Fighting Procedures:PERSON EXPOSED TO PRODUCTS OF COMBUSTION
    SHOULD WEAR NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:NONE KNOWN.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WEAR RUBBER GLOVES AND WIPE UP WITH ABSORBENT
    MATERIAL. RESIDUE MAY BE REMOVED WITH A CHLORINATED SOLVENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL, DRY LOCATION.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT NORMALLY REQUIRED. USE NIOSH/MSHA APPROVED
    RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:STANDARD INDUSTRIAL VENTILATION.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYE WASH AND DELUGE SHOWER .
    PROTECTIVE CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
WASTE DISP METH:WASTE DISPOSAL ASSISTANCE CONSULT H B FULLER
    ENVIRONMENTAL SERVICES AT 612-481-1588.

==================  Physical/Chemical Properties  ==================

HCC:N1
Vapor Pres:SEE ING 1
Spec Gravity:1.5334 
Appearance and Odor:LIQUID

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE ESTABLISHED.
Stability Condition to Avoid:NONE ESTABLISHED.
Hazardous Decomposition Products:INCOMPLETE COMBUSTION CAN YIELD LOW
    MOLECULAR WEIGHT HYDROCARBONS, CO AND NITROGEN COMPOUNDS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:PRODUCT DOES NOT MEET DEFINITION OF HAZ WASTE
    UNDER US EPA HAS WASTE REGS 40 CFR 261. STATE AND LOCAL HAZ WASTE
    REGS MAY APPLY IF THEY ARE DIFFERENT FROM FED REGS.
    INCINERATE/DISPOSE OF IN AN APPROVED  INDUSTRIAL LANDFILL. FOR
    ADDITIONAL (SUPDAT)

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.