ICI FIBERITE -- MXB 7502 EPOXY GLASS PREPREG  -- 8040-00N020952
<pre>=====================  Product Identification  =====================

Product ID:MXB 7502 EPOXY GLASS PREPREG
MSDS Date:06/25/1990
FSC:8040
NIIN:00N020952
MSDS Number: BLJBY
=== Responsible Party ===
Company Name:ICI FIBERITE
Address:501 WEST THIRD ST
City:WINONA
State:MN
ZIP:55987
Country:US
Info Phone Num:507-454-3611
Emergency Phone Num:507-454-3611
Preparer's Name:BRAD DIERINGER
CAGE:IO068
=== Contractor Identification ===
Company Name:FIBERITE CORP  SUB OF BEATRICE FOODS
Address:501 W 3RD STREET
Box:City:WINONA
State:MN
ZIP:55987-2854
Country:US
Phone:507-452-8082/507-452-8092
CAGE:07314
Company Name:ICI FIBERITE
Address:501 WEST THIRD ST
Box:787
City:WINONA
State:MN
ZIP:55987
Country:US
Phone:507-454-3611
CAGE:IO068

=============  Composition/Information on Ingredients  =============

Ingred Name:FIBROUS GLASS
CAS:65997-17-3
Fraction by Wt: 55-75%
OSHA PEL:N/K 
ACGIH TLV:10 MG/M3 (RDUST)

Ingred Name:EPOXY RESIN
Fraction by Wt: 20-45%

Ingred Name:AMINE CATALYST
Fraction by Wt: 2%

Ingred Name:ACETONE  (SARA III)
CAS:67-64-1
RTECS #:AL3150000
Fraction by Wt: <2%
OSHA PEL:1000PPM
ACGIH TLV:750PPM/1000STEL;9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EPOXY RESINS CAUSE IRRITATION OF
    SKIN/EYES, & POSSIBLE DERMATITIS OR ALLERGY/SENSITIZATION. VAPORS
    COMING OFF HEATED MATL MAY CAUSE IRRITATION. LIVER & KIDNEYS MAY BE
    TARGET ORGANS IF SOME EPOXIES ARE  INGESTED. EPOXIES ARE COMMONLY
    MUTAGENIC TO BACTERIA. (SEE EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: EXCESSIVE INHALATION OF ACETONE
    VAPORS CAN CAUSE NASAL & RESPIRATORY IRRITATION, HEADACHE, CNS
    DEPRESSION & NARCOSIS. FIBERS CAUSE MECHANICAL SKIN IRRITATION &
    POSSIBLE RESPIRATORY IRRITATIO N.
Medical Cond Aggravated by Exposure:EXISTING ALLERGIES MAY BE
    AGGRAVATED.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/WATER FOR A MINIMUM OF 15 MINUTES, CONSULT AN
    MD. SKIN: WASH W/SOAP & WATER. COOL WATER RINSING HELPS REMOVE
    FIBERS. INHAL: MOVE TO FRESH AIR. INGEST: UNLIKELY TO BE A PROBLEM.
    CALL MD ( ).

=====================  Fire Fighting Measures  =====================

Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
    PROTECTIVE EQUIPMENT . EXOTHERMIC POLYMERIZATION MAY OCCUR.
    EXOTHERM FIGHTING PROC: DISSIPATE HEAT BY (SUPP DATA)
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:PICK UP AND USE UNCONTAMINATED MATERIAL.
    CONTAMINATED MATERIAL SHOULD BE PICKED UP AND DISPOSED OF PROPERLY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AT 60-70F.
Other Precautions:NUISANCE MATERIALS MAY BE RELEASED AS DUSTS WHEN
    MACHINING CURED PRODUCTS. I/A/W GOOD INDUSTRIAL PRACTICE, HANDLE
    WITH CARE AND AVOID UNECESSARY PERSONAL CONTACT.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USUALLY NOT NEEDED. USE NIOSH/MSHA APPROVED
    RESPIRATORS IF TLV'S ARE EXCEEDED.
Ventilation:GOOD GENERAL VENTILATION & LOCAL EXHAUST RECOMMENDED,
    PARTICULARLY WHERE GRINDING OR HEATING OPERATIONS OCCUR.
Protective Gloves:IMPERVIOUS RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:CLEAN BODY-COVERING CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRE FIGHT PROC: SPREADING MATERIAL APART & DOUSING WITH WATER. CONTAIN
    EMISSIONS USING LOCAL EXHAUST.

==================  Physical/Chemical Properties  ==================

HCC:N1
Spec Gravity:1.5-2.2
Appearance and Odor:IMPREGNATED FIBERS, NO ODOR.
Percent Volatiles by Volume:<2(WT)

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
HF, STRONG OXIDIZERS, STRONG ACIDS, STRONG BASES.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:COX, NOX, AMINES, PHENOLS, BF3,
    INCOMPLETELY BURNED HYDROCARBONS.
Conditions to Avoid Polymerization:EXOTHERMIC POLYMERIZATION CAN OCCUR
    W/RAPID OR EXCESSIVE HEAT. WHEN HEATED TO DECOMP TOXIC EMISSIONS
    MAY BE RELEASED.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF I/A/W LOCAL, STATE, & FEDERAL REGS,
    WHICH MAY VARY BY LOCATION. QUESTIONS CONCERNING DISPOSAL SHLD BE
    DIRECTED TO FIBERITE'S SAFETY, HEALTH, & ENVIRON AFFAIRS DEPARTMENT
    FOR EVALUATION ON A  CASE BY CASE BASIS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.