BAKER SEALANTS AND COATINGS CO -- CEMENT, EPOXY, METAL REPAIR AND HULL SMOOTH  -- 8030-00-670-8553
<pre>=====================  Product Identification  =====================

Product ID:CEMENT, EPOXY, METAL REPAIR AND HULL SMOOTH
MSDS Date:02/12/1990
FSC:8030
NIIN:00-670-8553
Kit Part:Y
MSDS Number: BLJWL
=== Responsible Party ===
Company Name:BAKER SEALANTS AND COATINGS CO
Address:234 SUYDAM AVE
Box:B
City:JERSEY CITY
State:NJ
ZIP:07304-3306
Country:US
Info Phone Num:201-333-6986 / FAX 201-333-6955
Emergency Phone Num:201-333-6986
Preparer's Name:MARIO NAVARRO
CAGE:34094
=== Contractor Identification ===
Company Name:BAKER SEALANTS AND COATINGS CO
Address:234 SUYDAM AVE
Box:City:JERSEY CITY
State:NJ
ZIP:07304-3306
Country:US
Phone:201-333-6986
CAGE:34094
Company Name:STEVEN INDUSTRIES
Address:39 AVENUE C
Box:8
City:BAYONNE
State:NJ
ZIP:07002-3417
Country:US
Phone:201-437-6501
CAGE:33150

=============  Composition/Information on Ingredients  =============

Ingred Name:NONHAZARDOUS INGREDIENTS (NON-HAZARDOUS AS DEFINED PER
    PED-STD 313C, PAR. 3.3)
Other REC Limits:NONE SPECIFIED

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Effects of Overexposure:EYES: CAN CAUSE IRRITAION. SKIN: CAN CAUSE
    REDDENING, IRRITATION, DERMATITIS, POSSIBLE SENSITIZATION.
    INHALATION: EXCESSIVE INHALATION OF VAPORS CAN CAUSE NASAL AND
    RESPIRATORY IRRITATION. INGESTION:	CAN CAUSE GASTROINTESTINAL
    IRRITATION, NAUSEA, VOMITING AND DIARRHEA.
Medical Cond Aggravated by Exposure:SKIN SENSITIZATION.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH WITH LARGE AMOUNTS OF WATER, GET MEDICAL
    ATTENTION. SKIN: THOROUGHLY WASH EXPOSED AREA WITH SOAP AND WATER.
    IF IRRITATION OR RASH DEVELOPS, GET MEDICAL ATTENTION. INHALATION:
    REMOVE TO FRE SH AIR. INGESTION: DO NOT INDUCE VOMITING. CALL
    PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point:>150F,66C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, WATER SPRAY
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:ABSORB WITH VERMICULITE, FLOOR ABSORBENT. PUT
    INTO CONTAINERS FOR DISPOSAL

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AT ROOM TEMPERATURE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF NEEDED--ORGANIC CHEMICAL CARTRIDGE
    RESPIRATOR.
Ventilation:GOOD MECHANICAL VENTILATION AND LOCAL EXHAUST.
Protective Gloves:NATURAL RUBBER GLOVES
Eye Protection:CHEMICAL SPLASH GOGGLES
Supplemental Safety and Health
KEY1:F8.

==================  Physical/Chemical Properties  ==================

HCC:V4
Spec Gravity:1.60
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE PASTE; ODOR CHARACTERISTIC

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG MINERAL ACIDS, STRONG ALKALIES AND
    AMINES.
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE AND
    VARIOUS HYDROCARBONS, ETC.

====================  Disposal Considerations  ====================

Waste Disposal Methods:IN ACCORDANCE WITH ALL LOCAL STATE AND FEDERAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.