ATLAS MINERALS & CHEMICALS DIVISION, ESB INCORP. -- EXIDE EPOXYBOND PUTTY  -- 8040-01-017-3641
<pre>=====================  Product Identification  =====================

Product ID:EXIDE EPOXYBOND PUTTY
MSDS Date:01/01/1987
FSC:8040
NIIN:01-017-3641
MSDS Number: BLJYK
=== Responsible Party ===
Company Name:ATLAS MINERALS & CHEMICALS DIVISION, ESB INCORP.
City:MERTZTOWN
State:PA
ZIP:19539
Country:US
Info Phone Num:215-682-7171
Emergency Phone Num:215-682-7171
Preparer's Name:D. M. SHEETS
CAGE:04503
=== Contractor Identification ===
Company Name:ATLAS MINERALS & CHEMICAL INC
Address:FARMINGTON ROAD
Box:City:MERTZTOWN
State:PA
ZIP:19539-0038
Country:US
Phone:215-682-7171
CAGE:04503

=============  Composition/Information on Ingredients  =============

Ingred Name:EPOXY RESIN WITH POLYAMIDE HARDENER
Other REC Limits:NONE SPECIFIED

Ingred Name:MINERAL FILLERS
Other REC Limits:NONE SPECIFIED

Ingred Name:PIGMENTS
Other REC Limits:NONE SPECIFIED

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:NO
Health Hazards Acute and Chronic:PROLONGED OR REPEATED CONTACT WITH
    SKIN AND/OR EYES MAY CAUSE IRRITATION. ALLERGIC SKIN REACTIONS MAY
    OCCUR.

=======================  First Aid Measures  =======================

First Aid:CAUTION: THIS MATERIAL CONTAINS AN EPOXY RESIN. IN CASE OF
    SKIN CONTACT, WASH IMMEDIATELY WITH SOAP AND WATER. FOR EYES, FLUSH
    WITH PLENTY OF WATER FOR 15 MINUTES AND CONSULT A PHYSICIAN
    IMMEDIATELY.  REMOVE AND WASH CONTAMINATED CLOTHING BEFORE REUSE.

=====================  Fire Fighting Measures  =====================

Flash Point Method:OC
Flash Point:490F,254C
Extinguishing Media:WATER, CARBON DIOXIDE, FOAM, AND DRY CHEMICAL.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:SOAK UP IN ABSORBENT MATERIAL AND FLUSH AREA
    WITH PLENTY OF WATER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:CAUTION: MAY CAUSE SKIN IRRITATION.
Other Precautions:AVOID SKIN CONTACT. SPI CLASSIFICATION 2.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:AIR MASK IF IN CONFINED AREA.
Ventilation:LOCAL EXHAUST: PREFERABLE. MECHANICAL (GENERAL):
    ACCEPTABLE.
Protective Gloves:USE PROTECTIVE GLOVES.
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:SAFETY SHOWER AND EYE BATH. USE COVERALLS OR
    APRON TO PROTECT AGAINST SKIN & CLOTHING CONTAMINATION.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Appearance and Odor:RESIN AND HARDENER: NON-SAG PUTTY WITH
    CHARACTERISTIC ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Conditions to Avoid Polymerization:STRONG ACIDS, AMINES, MERCAPTANS AND
    BASES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE IN FURNACE OR BURY IN LANDFILL.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.