MASTER BOND INC -- SUPREME 11HT PART A -- 6850-00N012895
=====================  Product Identification  =====================

Product ID:SUPREME 11HT PART A
MSDS Date:12/20/1988
FSC:6850
NIIN:00N012895
Kit Part:Y
MSDS Number: BNNLR
=== Responsible Party ===
Company Name:MASTER BOND INC
Address:154 HOBART ST
City:HACKENSACK
State:NJ
ZIP:07601
Country:US
Info Phone Num:201-343-8983
Emergency Phone Num:201-343-8983
CAGE:59504
=== Contractor Identification ===
Company Name:MASTER BOND INC
Address:154 HOBART ST
Box:City:HACKENSACK
State:NJ
ZIP:07601
Country:US
Phone:201-343-8983
CAGE:59504

=============  Composition/Information on Ingredients  =============

Ingred Name:EPOXIDIZED PHENOL-FORMALDEHYDE NOVOLAC; (NOVOLAC TYPE EPOXY
    RESIN)
CAS:28064-14-4
Fraction by Wt: 49%

Ingred Name:AMINE FUNCTIONAL POLYMER; (CARBOXYL TERMINATED
    ACRYLONITRILE BUTADENE RESIN)
CAS:68683-29-4
Fraction by Wt: 23%

Ingred Name:ALUMINUM; (ALUMINUM POWDER)
CAS:7429-90-5
RTECS #:BD0330000
Fraction by Wt: 26%
OSHA PEL:15MG/M3 DUST;5 FUME
ACGIH TLV:10MG/M3 DUST;5 FUME

Ingred Name:SILICA GEL; (SILICA)
CAS:112945-52-5
RTECS #:VV7310000
Fraction by Wt: 2%
OSHA PEL:6 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:LD50:(ORAL,RAT) >10,000 MG/KG
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SKIN: IRRITATION MODERATE. MODERATE
    SENSITIZER. EYE: IRRITATION SLIGHT.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:IRRITATION, SENSITIZATION, DERMATITIS.
Medical Cond Aggravated by Exposure:ALLERGIES, ECZEMA OR SKIN
    CONDITIONS.

=======================  First Aid Measures  =======================

First Aid:EYES: IMMEDIATELY FLUSH WITH WATER FOR AT LEAST 15 MINUTES.
    CALL MD. INGEST: IF CONSCIOUS GIVE LARGE AMOUNTS OF WATER. CALL MD.
    INHAL: REMOVE TO FRESH AIR. GIVE OXYGEN IF BREATHING IS DIFFICULT.
    SKIN:  PROMPTLY WASH WITH WATER & MILD SOAP, REMOVE CONTAMINATED
    CLOTHING.

=====================  Fire Fighting Measures  =====================

Flash Point Method:CC
Flash Point:>500F,>260C
Extinguishing Media:CO*2, FOAM, DRY CHEMICAL, WATER SPRAY.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:DECOMPOSITION AND COMBUSTION PRODUCTS
    INCLUDE CO, CO*2, NITROGEN OXIDES AND MAY BE TOXIC.

==================  Accidental Release Measures  ==================

Spill Release Procedures:AVOID ALL PERSONNEL CONTACT. TAKE UP WITH
    ABSORBENT MATERIAL SUCH AS VERMICULITE. SHOVEL INTO CLOSABLE
    CONTAINERS. FLUSH CONTAMINATED AREA WITH WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL DARK DRY AREA IN CLOSED
    CONTAINERS. KEEP CONTAINERS CLOSED WHEN NOT IN USE. DOT CLASS 2 NOT
    REGULATED. CERCA STATUS NOT LISTED.
Other Precautions:PROMPTLY REMOVE ALL CONTAMINATED CLOTHING AND
    THOROUGHLY WASH BEFORE REUSE. AVOID BREATHING VAPOR, MIST OR SPRAY.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NORMALLY NOT NEEDED. USE NIOSH/MSHA APPROVED
    ORGANIC CHEMICAL CARTRIDGE RESPIRATOR IF REQUIRED.
Ventilation:LOCAL EXHST:GOOD LOCAL EXHST RECOMMENDED. MECH
    (GENERAL):GOOD GENERAL MECH VENT. SPECIAL:USE WITH GOOD
    VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES/RUBBER/PLASTIC.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:USE OF HAND CREAM RECOMMENDED. WEAR
    APPROPRIATE EQUIPMENT AND CLOTHING TO PREVENT EYE OR SKIN CONTACT.
Work Hygienic Practices:WASH AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:V7
Boiling Pt:B.P. Text:>392F,>200C
Vapor Pres:<1 @ 200C
Spec Gravity:1.25 (H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:GRAY COLORED VLOWABLE PASTE, LOW ODOR LEVEL.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:ELEVATED TEMPERATURES, STRONG ACIDS AND
    BASES IN BULK, EXPOSURE TO SPARKS AND OPEN FLAMES.
Hazardous Decomposition Products:CO, CO*2, NITROGEN OXIDES ALDEHYDES.
Conditions to Avoid Polymerization:ELEVATED TEMPERATURES, EXPOSURE TO
    SPARKS AND OPEN FLAMES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH FEDERAL, STATE &
    LOCAL REGULATIONS IN APPROVED INCINERATOR OR LANDFILL. NOT A
    HAZARDOUS WASTE UNDER RCRA (40 CFR 261).

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.