AUTO SPECIALTIES MANUFACTURING CO. -- A026 BRAKE AND CLUTCH COMPONENTS W/ASBESTOS -- 2530-00-467-0581
=====================  Product Identification  =====================

Product ID:A026 BRAKE AND CLUTCH COMPONENTS W/ASBESTOS
MSDS Date:12/20/1985
FSC:2530
NIIN:00-467-0581
MSDS Number: BNWLX
=== Responsible Party ===
Company Name:AUTO SPECIALTIES MANUFACTURING CO.
Address:643 GRAVES STREET
Box:8
City:ST JOSEPH
State:MI
ZIP:49085
Country:US
Info Phone Num:616-982-2200
Emergency Phone Num:616-982-2200
Preparer's Name:ROBERT L. KIBLER
CAGE:9B797
=== Contractor Identification ===
Company Name:AUTO SPECIALTIES MANUFACTURING CO.
Address:643 GRAVES STREET
Box:8
City:ST JOSEPH
State:MI
ZIP:49085
Country:US
Phone:616-982-2200
CAGE:9B797
Company Name:J I CASE CO.
Address:700 STATE STREET
Box:City:RACINE
State:WI
ZIP:53404
Country:US
Phone:414-636-6011
CAGE:10988

=============  Composition/Information on Ingredients  =============

Ingred Name:ASBESTOS, CHRYSOTILE
CAS:12001-29-5
RTECS #:CI6478500
Other REC Limits:NONE RECOMMENDED
OSHA PEL:0.2 FIBERS/CC
ACGIH TLV:2 FIBERS/CC; A1;9293

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:YES    IARC:YES	  OSHA:YES
Health Hazards Acute and Chronic:ACUTE: NO ACUTE EFFECTS ARE KNOWN;
    CHRONIC: DUST FROM ABRASIVE ACTIONS (E.G. CUTTING, MACHINING,
    FILING, ETC.) MAY CONTAIN ASBESTOS FIBERS. CHRONIC OVEREXPOSURE TO
    AIRBORNE FIBERS MAY LEAD TO ASBESTOS IS AND MESOTHELIOMA. SMOKING
    COMBINED WITH FIBER INHALATION GREATLY INCREASES LUNG CANCER RISK!
Explanation of Carcinogenicity:OVEREXPOSURE TO AIRBORNE CONCENTRATIONS
    OF ASBESTOS MAY LEAD TO ASBESTOSIS AND MESOTHELIOMA.
Effects of Overexposure:INHALATION: INHALATION OF AIRBORNE DUST
    CONTAINING ASBESTOS FIBERS ON REPEATED EXPOSURE MAY CAUSE OR CAN
    LEAD TO ASBESTOSIS / MESOTHELIOMA. SKIN: UNKNOWN. EYES: POTENTIAL
    IRRITATION FROM AIRBORNE DUST . INGESTION: UNKNOWN.
Medical Cond Aggravated by Exposure:EMPHYSEMA.

=======================  First Aid Measures  =======================

First Aid:INHALATION: REMOVE TO FRESH AIR. OBTAIN MEDICAL ADVICE. SKIN:
    WASH EXPOSED AREA WITH SOAP AND WATER. EYES: FLOOD WITH WATER. IF
    IRRITATION OCCURS, GET MEDICAL ATTENTION. INGESTION: CONSULT A
    PHYSICIAN . OTHER: CHANGE CLOTHING AS REQUIRED TOAVOID CARRYING
    DUST PARTICLES INTO OTHER AREAS.

=====================  Fire Fighting Measures  =====================

Flash Point:NONE
Extinguishing Media:MATERIAL IS NOT FLAMMABLE ; USE MEDIA APPROPRIATE
    FOR SURROUNDING FIRE.
Fire Fighting Procedures:COMBUSTION PRODUCTS OF THIS MATERIAL MAY BE
    TOXIC. USE A SELF-CONTAINED BREATHING APPARATUS WHEN FIGHTING FIRES
    INVOLVING CHEMCIAL PRODUCTS.
Unusual Fire/Explosion Hazard:NONE KNOWN

==================  Accidental Release Measures  ==================

Spill Release Procedures:USE PROPER PERSONAL PROTECTION. VACUUM OR WET
    CLEAN IF DUST IS INVOLVED. ANY VACUUM SYSTEM SHOULD BE EQUIPPED
    WITH AN OUTLET "HEPA" FILTER TO PREVENT REINTRODUCING ASBESTOS
    FIBERS TO THE ATMOSPHERE.
Neutralizing Agent:NOT APPLICABLE.

======================	Handling and Storage  ======================

Handling and Storage Precautions:HANDLE IN A MATTER TO MINIMIZE
    FORMATION OR RETENTION OF AIRBORNE DUST. USE PROPER PERSONAL
    PROTECTION FOR TASK AT HAND. CHECK W/YOUR SAFETY OFFICE!!!
Other Precautions:AS MANUFACTURED, LOCKED-IN ASBESTOS DOES NOT PRESENT
    A HAZARD. ONLY WHEN THE ITEM IS SUBJECTED TO ABRASIVE ACTIONS &
    DUST IS GENERATED, THEN ASBESTOS FIBERS MAY BE RELEASED AND BECOME
    AIRBORNE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF EXPOSURES EXCEED ESTABLISHED LIMITS, A NIOSH/
    MSHA APPROVED RESPIRATOR FOR ASBESTOS SHOULD BE USED. CONSULT YOUR
    SAFETY OFFICE/INDUSTRIAL HYGIENIST PERSONNEL FOR GUIDANCE FOR THE
    TASK AT HAND.
Ventilation:LOCAL EXHAUST IS RECOMMENDED IN SITUATIONS WHERE DUST IS
    GENERATED BY ABRASIVE ACTIONS, ABRASION OR OTHER MEANS.
Protective Gloves:AS REQUIRED FOR TASK AT HAND.
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS OR GOGGLES
Other Protective Equipment:AS REQUIRED FOR TASK AT HAND, AND THE
    GUIDANCE SET FORTH BY YOUR SAFETY OFFICE OR INDUSTRIAL HYGIENIST
    PERSONNEL.
Work Hygienic Practices:DO NOT INHALE DUST CREATED BY ABRADING ACTIONS.
    USE FULL PROTECTION AGAINST AIRBORNE FIBERS.AVOID AIRBORNE DUST
    CREATION
Supplemental Safety and Health
IF DUST FROM THIS PRODUCT IS PRODUCED, UNNECESSARY EXPOSURES SHOULD BE
    AVOIDED BY USING A VACUUM IN PLACE OF DRY BROOMING. USE WET METHOD
    OF CLEANING FOR OTHER SURFACES.

==================  Physical/Chemical Properties  ==================

HCC:T6
Evaporation Rate & Reference:NONE
Solubility in Water:NOT SOLUBLE
Appearance and Odor:BRAKE LINING KIT.
Percent Volatiles by Volume:NONE

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE KNOWN
Stability Condition to Avoid:NONE KNOWN

====================  Disposal Considerations  ====================

Waste Disposal Methods:DUST SHOULD BE HANDLED AS A HAZARDOUS AIR
    POLLUTANT I/A/W 40CFR61 SUBPART "M" PERTAINING TO ASBESTOS. USE
    LANDFILLS APPROVED FOR ASBESTOS DISPOSAL. NOTE IF ITEM UNDER
    CONSIDERATION FOR DISPOSAL IS "FR IABLE OR NON-FRIABLE".

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.