MBL INDUSTRIES INC -- POLI-KLEEN LEMON SCENTED WAX POLISH, WPW006 -- 7930-00N036583
=====================  Product Identification  =====================

Product ID:POLI-KLEEN LEMON SCENTED WAX POLISH, WPW006
MSDS Date:07/05/1986
FSC:7930
NIIN:00N036583
MSDS Number: BQRDN
=== Responsible Party ===
Company Name:MBL INDUSTRIES INC
Address:3600 WEST CARRIAGE DR
City:SANTA ANA
State:CA
ZIP:92704
Country:US
Info Phone Num:714-557-6505
Emergency Phone Num:714-557-6505
Preparer's Name:JAN R. GECKER
CAGE:MBLND
=== Contractor Identification ===
Company Name:MBL INDUSTRIES INC
Address:3600 W CARRIAGE DR
Box:City:SANTA ANA
State:CA
ZIP:92704
Country:US
Phone:800-525-7890
CAGE:MBLND

=============  Composition/Information on Ingredients  =============

Ingred Name:KEROSENS; (DEODORIZED KEROSENE)
CAS:8008-20-6
RTECS #:OA5500000
OSHA PEL:100 PPM (MFR)
ACGIH TLV:100 PPM (MFR)

Ingred Name:PROPANE, 2-METHYL-; (ISOBUTANE)  MFR CAS #: 74-98-6
CAS:75-28-5
RTECS #:TZ4300000
OSHA PEL:800 PPM (MFR)
ACGIH TLV:800 PPM (MFR)

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:NASAL AND RESPIRATORY IRRITATION.
    ASPIRATION OF MATERIAL INTO LUNGS CAN CAUSE CHEMICAL PNEUMONITIS
    WHICH CAN BE FATAL.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:INHALATION: NAUSEA, DIZZINESS, HEADACHE,
    ANESTHETIC EFFECTS. SKIN/EYES: IRRITANT. ABSORBED THROUGH SKIN: NOT
    READILY ABSORBED. INGESTION: NAUSEA, VOMITING.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN, EYE AND LUNG
    DISORDERS MAY BE AGGRAVATED TO PRODUCT.

=======================  First Aid Measures  =======================

First Aid:EYE: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. GET MEDICAL
    ATTENTION. SKIN: FLUSH WITH WATER. WASH WITH SOAP AND WARM WATER.
    GET MEDICAL ATTENTION. INHALATION: REMOVE TO FRESH AIR. IF NOT
    BREATHING GI VE CPR OR OXYGEN. GET IMMEDIATE MEDICALATTENTION.
    INGESTION: DO NOT INDUCE VOMITING. GET IMMEDIATE MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Lower Limits:1.8%
Upper Limits:9.5%
Extinguishing Media:WATER SPRAY, FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT
    EQUIP.CNTNRS EXPOS TO HEAT MUST BE WATER COOLED TO PVNT BURSTING &
    ROCKETING & FURTHER SPEWING OF IGNITED (SUPDAT)
Unusual Fire/Explosion Hazard:AEROSOL PRESSURIZED CONTAINERS WILL BURST
    AND OR ROCKET WHEN EXPOSED TO TEMPERATURES ABOVE 120F.

==================  Accidental Release Measures  ==================

Spill Release Procedures:TURN OFF ALL SOURCES OF IGNITION. VENTILATE
    AREA COMPLETELY. DIKE AREA. APPLY AN ABSORBENT AND SWEEP UP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:HANDLE AND STORE IN ACCORDANCE WITH
    LABEL DIRECTIONS.
Other Precautions:FLUSH OFF WITH WATER AND/OR WIPE OFF WITH RAGS ALL
    CONTAMINATION PRIOR TO WORKING ON EQUIPMENT.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE WHEN USED IN ACCORDANCE WITH LABEL
    DIRECTIONS. WEAR NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN .
Ventilation:USE WITH ADEQUATE VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE WHEN USED IN ACCORDANCE WITH LABEL
    DIRECTIONS.
Work Hygienic Practices:WASH WITH SOAP AND WATER BEFORE EATING,
    SMOKING, DRINKING OR USING TOILET FACILITIES.
Supplemental Safety and Health
PH: 9.7-10.3 @ 25C. FIRE FIGHT PROCEDURES: FLAMMABLE CONSTITUENTS.

==================  Physical/Chemical Properties  ==================

HCC:B3
Vapor Pres:41-51 @70F
Vapor Density:< 1.0
pH:SUPDAT
Evaporation Rate & Reference:>1.0 (BUTYL ACETATE=1)
Solubility in Water:MODERATE
Appearance and Odor:FOAMY SPRAY, LEMON ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZERS AND ALKALIES.
Stability Condition to Avoid:EXPOSURE TO TEMPERATURES IN EXCESS OF
    120F, HEAT, SPARK, OPEN FLAME, OR OTHER SOURCES OF IGNITION.
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE,
    HYDROGEN CHLORIDE, AND ORGANIC VAPORS OF UNKNOWN COMPOSITION.

====================  Disposal Considerations  ====================

Waste Disposal Methods:PLACE INTO CONTAINER FOR DISPOSAL. DISPOSE OF
    ALL WASTE IN ACCORDANCE WITH FEDERAL, STATE, AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.