FRANKLIN INTERNATIONAL -- TITEBOND II WOOD GLUE, 5004  -- 8040-00N055884
<pre>=====================  Product Identification  =====================

Product ID:TITEBOND II WOOD GLUE, 5004
MSDS Date:10/15/1992
FSC:8040
NIIN:00N055884
MSDS Number: BWCRG
=== Responsible Party ===
Company Name:FRANKLIN INTERNATIONAL
Address:2020 BRUCK ST
City:COLUMBUS
State:OH
ZIP:43207
Country:US
Info Phone Num:800-347-4583
Emergency Phone Num:614-445-1411
CAGE:FO059
=== Contractor Identification ===
Company Name:FRANKLIN INTERNATIONAL
Address:2020 BRUCK STREET
Box:City:COLUMBUS
State:OH
ZIP:43207
Country:US
Phone:800-877-4583/614-445-1493
CAGE:25589
Company Name:FRANKLIN INTERNATIONAL
Address:2020 BRUCK ST
City:COLUMBUS
State:OH
ZIP:43207
Phone:800-877-4583
CAGE:FO059

=============  Composition/Information on Ingredients  =============

Ingred Name:ACETIC ACID, VINYL ESTER; (VINYL ACETATE) (SARA III)
CAS:108-05-4
RTECS #:AK0875000
Fraction by Wt: 0.5%
OSHA PEL:10 PPM
ACGIH TLV:10 PPM/15STEL, A3
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:WATER
CAS:7732-18-5
RTECS #:ZC0110000
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:HYDROLYZED POLYVINYL ACETATE,COPOLYMER OF VINYL ACETATE AND
    VINYL ALCOHOL; (POLYVINYL ALCOHOL)
CAS:25213-24-5
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:ACRYLAMIDE, N-(HYDROXYMETHYL)-; (N-METHYLACRYLAMIDE)
CAS:924-42-5
RTECS #:AS3600000
Fraction by Wt: <0.01%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:ALUMINUM CHLORIDE
CAS:7446-70-0
RTECS #:BD0525000
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:FORMALDEHYDE  (SARA III)
CAS:50-00-0
RTECS #:LP8925000
Fraction by Wt: <0.05%
OSHA PEL:SEE 1910.1048
ACGIH TLV:C 0.3 PPM; A2
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

Ingred Name:ACETALDEHYDE  (SARA III)
CAS:75-07-0
RTECS #:AB1925000
Fraction by Wt: <0.04%
OSHA PEL:200 PPM
ACGIH TLV:C 25 PPM, A3
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:CALCULATED VOLATILE ORGANIC CONTENT (LESS WATER):13.7 G/L
RTECS #:9999999VO
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:SKIN:WILL NOT BE ABSORBED THRU
    SKIN. IN RARE CASES MAY CAUSE IRRITATION. EYE:IRRITATION.
    INHALATION. NO KNOWN ADVERSE EFFECTS FROM USE OF THIS PRODUCT @
    ROOM TEMPERATURE. HEATING OF THIS PRODUCT  MAY RESULT IN INCREASED
    EXPOSURE TO RESIDUAL MONOMER VAPORS. INHALATION OF VAPORS CAN CAUSE
    (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:IRRITATION OF UPPER RESPIRATORY.
    OVEREXPOS MAY CAUSE IRRITATION OF UPPER RESPIRATORY TRACT AND
    DIZZINESS. NOTE:TWO YEAR ANIMAL TESTS (INHALATION) @ 50, 200 & 600
    PPM OF VINYL ACETATE MONOMER  HAVE SHOWN THAT SOME ANIMALS IN 600
    PPMGROUP DEVELOPED TUMORS. THERE WAS NO TUMOR RESPONSE @ 50 &
    200PPM GROUPS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:CONSULT PHYSICIAN IN ALL CASES. SKIN:WASH WITH SOAP AND
    WATER. EYES:RINSE WITH RUNNING WATER FOR @ LEAST 15 MINUTES.
    INGEST:DO NOT INDUCE VOMITING. INHAL:REMOVE PATIENT TO FRESH AIR.

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:>200F,>93C
Extinguishing Media:WATER FOR DRIED ADHESIVE.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:CLEAN UP W/SUITABLE ABSORBENT & PLACE IN AN
    APPRVD CNTNR. IF PRODUCT HAS DRIED, SCRAPE UP & PLACE IN APPROVED
    CNTNR.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP FROM FREEZING. PRODUCT IS
    FREEZE/THAW STABLE FOR FIVE CYCLES. KEEP OUT OF REACH OF CHILDREN.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR SUITABLE NIOSH/MSHA APPRVD RESP WHERE
    EXPOSURE LIMITS ARE EXCEEDED.
Ventilation:LOC EXHAUST:AT POINT WHERE PROD IS DRIED. STANDARD PLANT
    VENT OTHERWISE. MECHANICAL (GENERAL).
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKER GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
PH:2.5-3.5.

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:210F,99C
Vapor Density:0.98
Spec Gravity:1.09 (H*20=1)
pH:SUPDAT
Evaporation Rate &amp; Reference:1 (WATER = 1)
Solubility in Water:MISCIBLE
Appearance and Odor:CREAM COLORED LIQUID, FAINT CHARACTERISTIC ODOR
Percent Volatiles by Volume:52

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND STRONG BASES.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:OXIDES OF CARBON AND MONOMER WHEN
    BURNED.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL OF PRODUCT & CONTAINER SHOULD COMPLY
    WITH ALL APPLICABLE FEDERAL, STATE AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.