FORMBY'S -- FORMBY'S TUNG OIL FINISH, HIGH GLOSS, 30066 -- -
=====================  Product Identification  =====================

Product ID:FORMBY'S TUNG OIL FINISH, HIGH GLOSS, 30066
MSDS Date:09/21/1999
FSC:NIIN:Submitter:N EN
Status Code:A
MSDS Number: CKCTZ
=== Responsible Party ===
Company Name:FORMBY'S
Address:10 MOUNTAINVIEW ROAD
City:UPPER SADDLE RIVER
State:NJ
ZIP:07458
Country:US
Info Phone Num:800-523-9299
Emergency Phone Num:216-566-2917
Resp. Party Other MSDS Num.:30066 01 00
CAGE:TO522
=== Contractor Identification ===
Company Name:FORMBY'S
Address:10 MOUNTAINVIEW ROAD
Box:City:UPPER SADDLE RIVER
State:NJ
ZIP:07458
Country:US
Phone:800-523-9299
CAGE:TO522

=============  Composition/Information on Ingredients  =============

Ingred Name:MINERAL SPIRITS
CAS:64742-88-7
= Wt:69.

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EXPOSURE MAY BE FROM INHALATION AND/OR
    SKIN OE EYE CONTACT, DEPENDING ON CONDITIONS OF USE. TO MINIMIZE
    EXPOSURE, FOLLOW RECOMMENDATIONS FOR PROPER USE, VENTILATION, &
    PERSONAL PROTECTIVE EQUIPMENT. A CUTE HEALTH HAZARDS: EFFECTS OF
    OVEREXP: IRRITATION OF EYES, SKIN AND RESPIRATORY SYSTEM. MAY CAUSE
    NERVOUS SYSTEM DEPRESSION. EXTREME OVEREX MAY RESULT IN
    UNCONSCIOUSNESS AND POSSIBLY DEATH.  CHRONIC  HEALTH HAZARDS:
    PROLONGED OVEREXPOSURE TO SOLVENT INGREDIENTS MAY CAUSE ADVERSE
    EFFECTS TO THE LIVER AND URINARY SYSTEMS. REPORTS HAVE ASSOCIATED
    REPEATED & PROLONGED OVEREXPOSURE TO SOLVENTS WITH PE RMANENT BRAIN
    AND NERVOUS SYSTEM DAMAGE.
Explanation of Carcinogenicity:NO INGREDIENT IN THIS PRODUCT IS AN
    IARC, NTP OR OSHA LISTED CARCINOGEN.
Effects of Overexposure:HEADACHE, DIZZINESS, NAUSEA, AND LOSS OF
    COORDINATION ARE INDICATIONS OF EXCESSIVE EXPOSURE TO VAPORS OR
    SPRAY MISTS. REDNESS AND ITCHING OR BURNING MAY INDICATE EYE OR
    EXCESSIVE SKIN EXPOSURE.
Medical Cond Aggravated by Exposure:NONE GENERALLY RECOGNIZED.

=======================  First Aid Measures  =======================

First Aid:IF INHALED: IF AFFECTED, REMOVE FROM EXPOSURE. RESTORE
    BREATHING. KEEP WARM AND QUIET.  IF ON SKIN: WASH AFFECTED AREA
    THOROUGHLY WITH SOAP AND WATER. REMOVE CONTAMINATED CLOTHING AND
    LAUNDER BEFORE R E-USE.  IF IN EYES:FLUSH EYES WITH LARGE AMOUNTS
    OF WATER FOR 15 MINUTES. GET MEDICAL ATTENTION.  IF SWALLOWED:
    NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. DO NOT
    INDUCE VOMITING. GIVE CONS CIOUS PATIENT SEVERAL GLASSES OF WATER.
    SEEK MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:=38.3C, 101.F
Lower Limits:1.0
Upper Limits:6.0
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM
Fire Fighting Procedures:FULL PROTECTIVE EQUIPMENT INCLUDING
    SELF-CONTAINED BREATHING APPARATUS SHOULD BE USED. WATER SPRAY MAY
    BE INEFFECTIVE. IF WATER IS USED, FOG NOZZLES ARE PREFERABLE. WATER
    MAY BE USED TO COOL CLOSED CO NTAINERS TO PREVENT PRESSURE BUILD-UP
    AND POSSIBLE AUTOIGNITION OR EXPLOSION WHEN EXPOSED TO EXTREME
    HEAT.
Unusual Fire/Explosion Hazard:KEEP CONT TIGHTLY CLOSED. ISOLATE FRM
    HEAT, ELECTRICAL EQUIP, SPARKS , & OPEN FLAME. CLOSED CONT MAY
    EXPLODE WHEN EXP TO EXT HEAT. APP TO HOT SURFACES REQUIRES SPECIAL
    PREC. DURING EMERG CONDITIONS OV EREXP TO DECOMP PRODUCTS MAY CAUSE
    A HEALTH HAZARD. SYMPTOMS MAY NOT BE IMMEDIATELY APPARENT. OBTAIN
    MEDICAL ATTENTION.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE AND
    REMOVE WITH INERT ABSORBENT.

======================	Handling and Storage  ======================

Handling and Storage Precautions:CONTENTS ARE COMBUSTIBLE. KEEP AWAY
    FROM HEAT AND OPEN FLAME. CONSULT NFPA CODE. USE APPROVED BONDING
    AND GROUNDING PROCEDURES. KEEP CONTAINER CLOSED WHEN NOT IN USE.
    TRANSFER ONLY TO APPROVED CONTAIN ERS WITH COMPLETE AND APPROPRIATE
    LABELING. DO NOT TAKE INTERNALLY. KEEP OUT OF REACH OF CHILDREN.
Other Precautions:INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING AND
    INHALING THE CONTENTS CAN BE HARMFUL OR FATAL.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF PERSONAL EXPOSURE CANNOT BE CONTROLLED BELOW
    APPLIC LIMITS BY VENTILATION, WEAR PROPERLY FITTED ORGANIC
    VAPOR/PARTICULATE RESP APPROVED BY NIOSH FOR PROTECTION AGAINST
    MATERIALS IN SECTION 2. WHEN  SANDING OR ABRADING THE DRIED FILM,
    WEAR A DUST/MIST RESP APPROVED BY NIOSH FOR DUST WHICH MAY BE
    GENERATED FRM THIS PRODUCT, UNDERLYING PAINT, OR THE ABRASIVE.
Ventilation:LOCAL EXHAUST PREFERABLE. GENERAL EXHAUST ACCEPTABLE IF THE
    EXPOSURE TO MATERIALS IN SECTION 2 IS MAINTAINED BELOW APPLICABLE
    EXPOSURE LIMITS. REFER TO OSHA STD
Protective Gloves:GLOVES RECOMMENDED BY THE SUPPLIER FOR PROTECTION
    AGAINST THE MATLS IN SEC 2
Eye Protection:ANSI APPROVED CHEMICAL SAGETY GOGGLES 
Other Protective Equipment:EYEWASH AND DELUGE SHOWER MEETING ANSI
    DESIGN CRITERIA .
Work Hygienic Practices:USE ONLY WITH ADEQUATE VENTILATION. AVOID
    BREATHING VAPOR AND SPRAY MIST. AVOID CONTACT WITH SKIN AND EYES.
    WASH HANDS AFTER USING. THIS COATING MAY CONTAIN MATERIALS
    CLASSIFIED AS NUISANCE (OTHER INFO)
Supplemental Safety and Health
DOL STORAGE CATEGORY 2.  FLAMMABILITY CLASSIFICATION: COMBUSTIBLE,
    FLASH ABOVE 99 AND BELOW 200 F.  HMIS CODES: HEALTH 2, FLAMMABILITY
    2, REACTIVITY 0.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:300 - 395 F
Vapor Density:HVYR T AIR
Spec Gravity:0.84
VOC Pounds/Gallon:582
VOC Grams/Liter:4.85
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:76%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE KNOWN
Hazardous Decomposition Products:BY FIRE: CARBON DIOXIDE, CARBON
    MONOXIDE
Conditions to Avoid Polymerization:WILL NOT OCCUR

====================  Disposal Considerations  ====================

Waste Disposal Methods:WASTE FROM THIS PRODUCT MAY BE HAZARDOUS AS
    DEFINED UNDER THE RESOURCE CONSERVATION & RECOVERY ACT (RCRA) 40
    CFR 261. WASTE MUST BE TESTED FOR IGNITABILITY TO DETERMINE THE
    APPLIC EPA HAZARDOUS WASTE	NUMBERS. INCINERATE IN APPROVED
    FACILITY. DO NOT INCINERATE CLOSED CONTAINER. DISPOSE OF IAW
    FEDERAL , STATE, & LOCAL REGULATIONS REGARDING POLLUTION.

=====================  Regulatory Information  =====================

SARA Title III Information:NO INGREDIENTS IN THIS PRODUCT ARE SUBJECT
    TO SARA 313 (40 CFR 372.65C) SUPPLIER NOTIFICATION.
Federal Regulatory Information:ALL CHEMICALS IN THIS PRODUCT ARE
    LISTED, OR ARE EXEMPT FROM LISTING, ON THE TSCA INVENTORY.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.