iso-Propyl Acetate

MSDS Number: P6753 --- Effective Date: 12/08/96


1. Product Identification

Synonyms: sec-Propyl Acetate; Acetic Acid Isopropyl Ester; 2-Propyl Acetate
CAS No.: 108-21-4
Molecular Weight: 102.13
Chemical Formula: CH3COOCH(CH3)2
Product Codes: U385


2. Composition/Information on Ingredients


  Ingredient                                CAS No         Percent   Hazardous                                       
  ---------------------------------------   ------------   -------   ---------        
 
  Isopropyl Acetate                         108-21-4       90 - 100%    Yes                                                                  
 


3. Hazards Identification

Emergency Overview
--------------------------
DANGER! FLAMMABLE! CAUSES IRRITATION. MAY BE HARMFUL IF SWALLOWED OR INHALED. TARGET ORGAN(S): Eyes, skin, central nervous system, respiratory system.


J.T. Baker SAF-T-DATA(tm) Ratings (Provided here for your convenience)
-----------------------------------------------------------------------------------------------------------
Health Rating: 1 - Slight
Flammability Rating: 3 - Severe (Flammable)
Reactivity Rating: 1 - Slight
Contact Rating: 2 - Moderate
Lab Protective Equip: GOGGLES; LAB COAT; VENT HOOD; PROPER GLOVES; CLASS
Storage Color Code: Red (Flammable)
-----------------------------------------------------------------------------------------------------------

Potential Health Effects
----------------------------------

Inhalation:
None identified.

Ingestion:
None identified.

Skin Contact:
None identified.

Eye Contact:
None identified.

Chronic Exposure:
No information found.

Aggravation of Pre-existing Conditions:
No information found.


4. First Aid Measures

Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Prompt action is essential.

Ingestion:
Induce vomiting immediately as directed by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.

Skin Contact:
In case of contact, flush skin with water.

Eye Contact:
In case of eye contact, immediately flush with plenty of water for at least 15 minutes.


5. Fire Fighting Measures

Fire:
Flash point: 4C (39F) CC Autoignition temperature: 460C (860F) Flammable limits in air % by volume: lel: 1.8; uel: 8.0

Explosion:
Vapors may flow along surfaces to distant ignition sources and flash back. Closed containers exposed to heat may explode. Contact with strong oxidizers may cause fire.

Fire Extinguishing Media:
Use alcohol foam, dry chemical or carbon dioxide. (Water may be ineffective.)

Special Information:
Firefighters should wear proper protective equipment and self-contained breathing apparatus with full facepiece operated in positive pressure mode. Move exposed containers from fire area if it can be done without risk. Use water to keep fire-exposed containers cool.


6. Accidental Release Measures

Wear self-contained breathing apparatus and full protective clothing. Shut off ignition sources; no flares, smoking or flames in area. Stop leak if you can do so without risk. Use water spray to reduce vapors. Take up with sand or other non-combustible absorbent material and place into container for later disposal. Flush area with water. J. T. Baker SOLUSORB(tm) solvent adsorbent is recommended for spills of this product.


7. Handling and Storage

Bond and ground containers when transferring liquid. Containers of this material may be hazardous when empty since they retain product residues (vapors, liquid); observe all warnings and precautions listed for the product.


8. Exposure Controls/Personal Protection

Airborne Exposure Limits:
-OSHA Permissible Exposure Limit (PEL): 250 ppm (TWA) -ACGIH Threshold Limit Value (TLV): 250 ppm (TWA), 310 ppm (STEL)

Ventilation System:
A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.

Personal Respirators (NIOSH Approved):
For conditions of use where exposure to the substance is apparent, consult an industrial hygienist. For emergencies, or instances where the exposure levels are not known, use a full-facepiece positive-pressure, air-supplied respirator. WARNING: Air purifying respirators do not protect workers in oxygen-deficient atmospheres.

Skin Protection:
Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.

Eye Protection:
Use chemical safety goggles and/or a full face shield where splashing is possible. Maintain eye wash fountain and quick-drench facilities in work area.


9. Physical and Chemical Properties

Appearance:
Clear, colorless liquid.

Odor:
Fruity odor.

Solubility:
Moderate (1-10%)

Specific Gravity:
0.87

pH:
No information found.

% Volatiles by volume @ 21C (70F):
100

Boiling Point:
89C (192F)

Melting Point:
-69C (-92F)

Vapor Density (Air=1):
3.5

Vapor Pressure (mm Hg):
43 @ 20C (68F)

Evaporation Rate (BuAc=1):
5


10. Stability and Reactivity

Stability:
Stable under ordinary conditions of use and storage.

Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.

Hazardous Polymerization:
Will not occur.

Incompatibilities:
Strong oxidizing agents, strong acids, nitrates, alkalis, strong bases.

Conditions to Avoid:
Heat, flame, other sources of ignition.


11. Toxicological Information

  --------\Cancer Lists\------------------------------------------------------
                                         ---NTP Carcinogen---
  Ingredient                             Known    Anticipated    IARC Category
  ------------------------------------   -----    -----------    -------------
  Isopropyl Acetate (108-21-4)            No          No            None


12. Ecological Information

Environmental Fate:
No information found.

Environmental Toxicity:
No information found.


13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be handled as hazardous waste and sent to a RCRA approved waste facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.


14. Transport Information

Domestic (Land, D.O.T.)
-----------------------
Proper Shipping Name: ISOPROPYL ACETATE
Hazard Class: 3
UN/NA: UN1220
Packing Group: II
Information reported for product/size: 240ML

International (Water, I.M.O.)
-----------------------------
Proper Shipping Name: ISOPROPYL ACETATE
Hazard Class: 3.2
UN/NA: UN1220
Packing Group: II
Information reported for product/size: 240ML

International (Air, I.C.A.O.)
-----------------------------
Proper Shipping Name: ISOPROPYL ACETATE
Hazard Class: 3.2
UN/NA: UN1220
Packing Group: II
Information reported for product/size: 240ML



15. Regulatory Information


  --------\Chemical Inventory Status - Part 1\---------------------------------
  Ingredient                                       TSCA  EC   Japan  Australia
  -----------------------------------------------  ----  ---  -----  ---------
  Isopropyl Acetate (108-21-4)                      Yes  Yes   Yes      Yes                                      
 
  --------\Chemical Inventory Status - Part 2\---------------------------------
                                                          --Canada--
  Ingredient                                       Korea  DSL   NDSL  Phil.
  -----------------------------------------------  -----  ---   ----  -----
  Isopropyl Acetate (108-21-4)                      No    Yes   No     Yes                             
 
  --------\Federal, State & International Regulations - Part 1\----------------
                                             -SARA 302-    ------SARA 313------
  Ingredient                                 RQ    TPQ     List  Chemical Catg.
  -----------------------------------------  ---   -----   ----  --------------
  Isopropyl Acetate (108-21-4)               No    No      No         No
 
  --------\Federal, State & International Regulations - Part 2\----------------
                                                        -RCRA-    -TSCA-
  Ingredient                                 CERCLA     261.33     8(d) 
  -----------------------------------------  ------     ------    ------
  Isopropyl Acetate (108-21-4)               No         No         No                   
 
 
Chemical Weapons Convention:  No     TSCA 12(b):  No     CDTA:  No
SARA 311/312:  Acute: Yes      Chronic: Yes  Fire: Yes Pressure: No
Reactivity: No          (Pure / Liquid)


Australian Hazchem Code: 3[Y]E
Poison Schedule: No information found.

WHMIS:
This MSDS has been prepared according to the hazard criteria of the Controlled Products Regulations (CPR) and the MSDS contains all of the information required by the CPR.


16. Other Information

NFPA Ratings: Health: 1 Flammability: 3 Reactivity: 0

Label Hazard Warning:
DANGER! FLAMMABLE! CAUSES IRRITATION. MAY BE HARMFUL IF SWALLOWED OR INHALED. TARGET ORGAN(S): Eyes, skin, central nervous system, respiratory system.

Label Precautions:
Keep away from heat, sparks, flame. Do not get in eyes, on skin, on clothing. Avoid breathing vapor. Keep in tightly closed container. Use with adequate ventilation. Wash thoroughly after handling. In case of fire, use alcohol foam, dry chemical, carbon dioxide - water may be ineffective. Flush spill area with water spray. Prevent run-off from entering drains, sewers, or streams.

Label First Aid:
If swallowed, induce vomiting immediately as directed by medical personnel. Never give anything by mouth to an unconscious person. If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Prompt action is essential. In case of contact, immediately flush eyes or skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Wash clothing before reuse.

Product Use:
Laboratory Reagent.

Revision Information:
Pure. New 16 section MSDS format, all sections have been revised.

Disclaimer:
************************************************************************************************ Mallinckrodt Baker, Inc. provides the information contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This document is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose. MALLINCKRODT BAKER, INC. MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE INFORMATION SET FORTH HEREIN OR THE PRODUCT TO WHICH THE INFORMATION REFERS. ACCORDINGLY, MALLINCKRODT BAKER, INC. WILL NOT BE RESPONSIBLE FOR DAMAGES RESULTING FROM USE OF OR RELIANCE UPON THIS INFORMATION.
************************************************************************************************ Prepared by: Strategic Services Division
Phone Number: (314) 539-1600 (U.S.A.)