DEXTER AEROSPACE               -- XEA 9396.6MD PART B, AB9304000               
=======================================================
MSDS Safety Information 
=======================================================
FSC: 8040
MSDS Date: 10/01/1993
MSDS Num: BXZBK
LIIN: 00N061098
Product ID: XEA 9396.6MD PART B, AB9304000
MFN: 02
Kit Part: Y
Responsible Party
Cage: 33564
Name: DEXTER AEROSPACE
Address: 2850 WILLOW PASS ROAD
City: PITTSBURG CA 94565-3299
Info Phone Number: 202-483-7616
Emergency Phone Number: 800-424-9300 (CHEMTREC)
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary 
=======================================================
Cage: 33564
Name: DEXTER CORPORATION ADHESIVE & COATING SYSTEMS
Address: 2850 WILLOW PASS ROAD
Box: 312
City: BAY POINT CA 94565-3299
Phone: 202-483-7616
=======================================================
Ingredients 
=======================================================
Name: *** PROPRIETARY  ***
-----------------------------
=======================================================
Health Hazards Data 
=======================================================
LD50 LC50 Mixture: SEE INGREDIENTS
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE: THIS MATERIAL IS CORROSIVE TO EYES & SKIN.
  BRIEF CONTACT MAY CAUSE CHEMICAL BURNS. VAPORS & MISTS WILL IRRITATE NOSE
  & THROAT. CHRONIC: REPEATED/PROLONGED SKIN CONTACT MAY RESULT IN BURNS
  & POS SIBLE ALLERGIC SENSITIZATION.
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: HLTH HAZ: SKIN/EYE IRRITATION. CHEST
  DISCOMFORT.
Medical Cond Aggravated By Exposure: SKIN SENSITIZATION.
First Aid: EYE: FLUSH W/WATER FOR AT LEAST 15 MINS. IF IRRIT PERSISTS, GET MED
  ATTN. SKIN: WASH THOROUGHLY W/SOAP & WATER. IF IRRIT PERSISTS, GET MED
  ATTN. INHAL: REMOVE VICTIM TO FRESH AIR. IF SYMPTOMS PERSIST,  GET MED ATTN.
  INGEST: DRINK PLENTY OF WATER. GET MED ATTN IMMED.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: WEAR PROTECTIVE CLOTHING, GLOVES & SAFETY
  GLASSES. ABSORB SPILL W/SORBENT MATL SUCH AS VERMICULITE/SAND. SCRAPE UP OR
  SHOVEL INTO DOT APPROVED WASTE CONTAINERS.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: MATL AS A WASTE IS NOT CONSIDERED RCRA HAZ WASTE.
  HOWEVER, INCIN IN AN EPA APPRVD WSTE INCIN IS PREF DISP PRACTICE. CHEM ADDTN,
  PROCESSING/OTHERWISE ALTERING THIS MATL MAY MAKE THE WASTE MGMT INFO HER EIN
  INCOMPLETE, INACCURATE/OTHERWISE (SUPDAT)
Handling And Storage Precautions: REFRIGERATED STOR IS RECOMM TO MAINTAIN PROD
  QUALITY. PROD MAY BE STOR AT ROOM TEMP FOR UP TO 12 MONTHS. KEEP THIS CNTNR
  TIGHTLY CLSD WHEN NOT IN USE.
Other Precautions: FOLLOW CURING SCHEDULE & MIXING RATIOS AS RECOMM IN PROD
  LITERATURE. DO NOT CUT, GRIND, WELD/DRILL ON/NEAR THIS CNTNR. EMPTY CNTNRS
  RETAIN PROD RESIDUE SO OBEY HAZARD WARNINGS & HANDLE EMPTY CNTNRS AS  IF
  THEY WERE FULL.
=======================================================
Fire and Explosion Hazard Information 
=======================================================
Extinguishing Media: DRY CHEMICAL, OR HALON FIRE EXTINGUISHER OR WATER SPRAY,
  FOAM OR FOG.
Fire Fighting Procedures: WEAR NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
  EQUIPMENT(FP N). CARTRIDGE RESPIRATORS DO NOT PROVIDE ADEQUATE PROTECTION FOR
  FIRE FIGHTERS/EXOTHERM MITIGATION.
Unusual Fire/Explosion Hazard: MAY LIBERATE LARGE QUANTITIES OF DENSE
  FOUL-SMELLING SMOKE WHICH MAY CONTAIN UNIDENTIFIED TOXIC GASES.
=======================================================
Control Measures 
=======================================================
Respiratory Protection: IF LOCAL EXHAUST VENT IS INADEQUATE, A NIOSH/MSHA
  APPROVED RESPIRATOR EQUIPPED W/ORGANIC VAPOR CARTRIDGE MAY BE APPROPRIATE.
Ventilation: LOCAL EXHAUST VENTILATION AT THE POINT OF USE.
Protective Gloves: BUTYL RUBBER, PVC/NITRILE RUBBER GLOVES.
Eye Protection: ANSI APPRVD CHEM WORKERS GOGGS
Other Protective Equipment: EYEWASH & SAFETY SHOWER MEETING ANSI DESIGN
  CRITERIA (FP N).
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: USERS OF THE "L" VERSION OF  CONSULT THE "LR"
  VERSION FOR FURTHTER INFO(FP N). CNDTN TO AVOID: UNLESS CURING SURFACES TO BE
  BONDED. FAILURE TO OBSERVE THESE PRECS MAY RSLT IN EXCESS HEAT BUILD-UP 
  CAUSING AN EXOTHERM. THE EXOTHERM HAS POTNL FOR RELEASE OF TOXIC GASES. WASTE
  DISP METH: INAPPROP. ADDTNLY,
=======================================================
Physical/Chemical Properties 
=======================================================
B.P. Text: 644F,340C
Vapor Pres: <0.1
Vapor Density: 8.6
Spec Gravity: 0.99
Solubility in Water: SIGNIFICANT
Appearance and Odor: BLACK GEL W/AMINE ODOR.
=======================================================
Reactivity Data 
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: AVOID MIXING RESIN & CURING AGENT IN BATCHES
Materials To Avoid: STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL ACIDS.
Hazardous Decomposition Products: CO, NO*X, ALDEHYDES, ACIDS & UNDETERMINED
  ORGANICS.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT.
=======================================================
Toxicological Information 
=======================================================
=======================================================
Ecological Information 
=======================================================
=======================================================
MSDS Transport Information 
=======================================================
=======================================================
Regulatory Information 
=======================================================
=======================================================
Other Information 
=======================================================
=======================================================
HAZCOM Label 
=======================================================
Product ID: XEA 9396.6MD PART B, AB9304000
Cage: 33564
Company Name: DEXTER CORPORATION ADHESIVE & COATING SYSTEMS
Street: 2850 WILLOW PASS ROAD
PO Box: 312
City: BAY POINT CA
Zipcode: 94565-3299
Health Emergency Phone: 800-424-9300 (CHEMTREC)
Label Required IND: Y
Date Of Label Review: 06/27/1995
Status Code: C
Label Date: 06/27/1995
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Severe
Fire Hazard: None
Reactivity Hazard: None
Hazard And Precautions: ACUTE: EYES/SKIN: CORROSIVE. MAY CAUSE CHEMICAL BURNS.
  INHAL: NOSE & THROAT IRRITATION. CHRONIC: REPEATED OR PROLONGED SKIN
  CONTACT MAY RESULT IN BURNS AND POSSIBLE ALLERGIC SENSITIZATION.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
  information is formulated for use by elements of the Department of Defense.
  The United States of America in no manner whatsoever expressly or implied
  warrants, states, or intends said information to have any application, use or
  viability by or to any person or persons outside the Department of Defense
  nor any person or persons contracting with any instrumentality of the United
  States of America and disclaims all liability for such use. Any person
  utilizing this instruction who is not a military or civilian employee of the
  United States of America should seek competent professional advice to verify
  and assume responsibility for the suitability of this information to their
  particular situation regardless of similarity to a corresponding Department
  of Defense or other government situation.