MOPS, GENAR 3-(N-MORPHOLINO) PROPANE SULFONIC ACID

MSDS Number: M8014 --- Effective Date: 06/16/97


1. Product Identification

Synonyms: 4-Morpholinepropanesulfonic acid; 3-(N-Morpholino)propanesulfonic acid; MOPS; n-(3-sulfopropyl morpholine)
CAS No.: 1132-61-2
Molecular Weight: 209.27
Chemical Formula: C7H15NO4S
Product Codes: J.T. Baker: 4004 Mallinckrodt: V087


2. Composition/Information on Ingredients


  Ingredient                                CAS No         Percent   Hazardous                                       
  ---------------------------------------   ------------   -------   ---------        
 
  3-(N-Morpholino) Propane Sulfonic Acid    1132-61-2        100%       Yes                                                               
 


3. Hazards Identification

Emergency Overview
--------------------------
CAUTION! MAY BE HARMFUL IF SWALLOWED, INHALED OR ABSORBED THROUGH SKIN. MAY CAUSE IRRITATION TO SKIN, EYES, AND RESPIRATORY TRACT.


Potential Health Effects
----------------------------------

Information on the human health effects from exposure to this substance is limited.

Inhalation:
May cause irritation to the respiratory tract.

Ingestion:
No information found, but compound should be handled as a potential health hazard.

Skin Contact:
May cause irritation.

Eye Contact:
May cause irritation.

Chronic Exposure:
No information found.

Aggravation of Pre-existing Conditions:
No information found.


4. First Aid Measures

Inhalation:
Remove to fresh air. Get medical attention for any breathing difficulty.

Ingestion:
Induce vomiting immediately as directed by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.

Skin Contact:
Wash exposed area with soap and water. Get medical advice if irritation develops.

Eye Contact:
Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.


5. Fire Fighting Measures

Fire:
Flash point: 116C (241F) CC As with most organic solids, fire is possible at elevated temperatures or by contact with an ignition source.

Explosion:
Fine dust dispersed in air in sufficient concentrations, and in the presence of an ignition source is a potential dust explosion hazard.

Fire Extinguishing Media:
Water spray, dry chemical, alcohol foam, or carbon dioxide.

Special Information:
In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full facepiece operated in the pressure demand or other positive pressure mode.


6. Accidental Release Measures

Remove all sources of ignition. Ventilate area of leak or spill. Wear appropriate personal protective equipment as specified in Section 8. Spills: Clean up spills in a manner that does not disperse dust into the air. Use non-sparking tools and equipment. Reduce airborne dust and prevent scattering by moistening with water. Pick up spill for recovery or disposal and place in a closed container.


7. Handling and Storage

Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Avoid dust formation and control ignition sources. Employ grounding, venting and explosion relief provisions in accord with accepted engineering practices in any process capable of generating dust and/or static electricity. Empty only into inert or non-flammable atmosphere. Emptying contents into a non-inert atmosphere where flammable vapors may be present could cause a flash fire or explosion due to electrostatic discharge.


8. Exposure Controls/Personal Protection

Airborne Exposure Limits:
None established.

Ventilation System:
A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.

Personal Respirators (NIOSH Approved):
For conditions of use where exposure to the dust or mist is apparent, a half-face dust/mist respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.

Skin Protection:
Wear protective gloves and clean body-covering clothing.

Eye Protection:
Use chemical safety goggles. Maintain eye wash fountain and quick-drench facilities in work area.

Other Control Measures:
There is insufficient data in the published literature to assign complete numerical SAF-T-DATA* ratings and laboratory protective equipment for this product. Special precautions must be used in storage, use and handling. Protective equipment for laboratory bench use should be chosen using professional judgment based on the size and type of reaction or test to be conducted and the available ventilation, with overriding consideration to minimize contact with the chemical.


9. Physical and Chemical Properties

Appearance:
White powder.

Odor:
No information found.

Solubility:
Soluble in water.

Specific Gravity:
No information found.

pH:
2.5 (1% aqueous solution)

% Volatiles by volume @ 21C (70F):
0

Boiling Point:
No information found.

Melting Point:
277C (531F)

Vapor Density (Air=1):
No information found.

Vapor Pressure (mm Hg):
No information found.

Evaporation Rate (BuAc=1):
No information found.


10. Stability and Reactivity

Stability:
Stable under ordinary conditions of use and storage.

Hazardous Decomposition Products:
Burning may produce carbon monoxide, carbon dioxide, sulfur oxides, and nitrogen oxides. Formation of 1,3-Propane sultone at high temperatures.

Hazardous Polymerization:
Will not occur.

Incompatibilities:
Strong oxidizers, strong bases.

Conditions to Avoid:
Heat, incompatibles.


11. Toxicological Information


No LD50/LC50 information found relating to normal routes of occupational exposure.

  --------\Cancer Lists\------------------------------------------------------
                                         ---NTP Carcinogen---
  Ingredient                             Known    Anticipated    IARC Category
  ------------------------------------   -----    -----------    -------------
  3-(N-Morpholino) Propane Sulfonic       No          No            None
  Acid (1132-61-2)                    


12. Ecological Information

Environmental Fate:
No information found.

Environmental Toxicity:
No information found.


13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.


14. Transport Information

Not regulated.


15. Regulatory Information


  --------\Chemical Inventory Status - Part 1\---------------------------------
  Ingredient                                       TSCA  EC   Japan  Australia
  -----------------------------------------------  ----  ---  -----  ---------
  3-(N-Morpholino) Propane Sulfonic Acid            Yes  Yes   No       Yes                                      
  (1132-61-2)                                     
 
  --------\Chemical Inventory Status - Part 2\---------------------------------
                                                          --Canada--
  Ingredient                                       Korea  DSL   NDSL  Phil.
  -----------------------------------------------  -----  ---   ----  -----
  3-(N-Morpholino) Propane Sulfonic Acid            No    Yes   No     No                     
  (1132-61-2)                                     
 
  --------\Federal, State & International Regulations - Part 1\----------------
                                             -SARA 302-    ------SARA 313------
  Ingredient                                 RQ    TPQ     List  Chemical Catg.
  -----------------------------------------  ---   -----   ----  --------------
  3-(N-Morpholino) Propane Sulfonic Acid     No    No      No         No
  (1132-61-2)                                 
 
  --------\Federal, State & International Regulations - Part 2\----------------
                                                        -RCRA-    -TSCA-
  Ingredient                                 CERCLA     261.33     8(d) 
  -----------------------------------------  ------     ------    ------
  3-(N-Morpholino) Propane Sulfonic Acid     No         No         No                  
  (1132-61-2)                             
 
 
Chemical Weapons Convention:  No     TSCA 12(b):  No     CDTA:  No
SARA 311/312:  Acute: Yes      Chronic: No   Fire: No  Pressure: No
Reactivity: No          (Pure / Solid) 


Australian Hazchem Code: No information found.
Poison Schedule: No information found.

WHMIS:
This MSDS has been prepared according to the hazard criteria of the Controlled Products Regulations (CPR) and the MSDS contains all of the information required by the CPR.


16. Other Information

NFPA Ratings: Health: 1 Flammability: 1 Reactivity: 0

Label Hazard Warning:
CAUTION! MAY BE HARMFUL IF SWALLOWED, INHALED OR ABSORBED THROUGH SKIN. MAY CAUSE IRRITATION TO SKIN, EYES, AND RESPIRATORY TRACT.

Label Precautions:
No SAF-T-DATA Ratings have been developed for this product. Read and follow all warnings, precautions, instructions and other safety and handling information on the label and MSDS. Avoid breathing dust. Avoid contact with eyes, skin and clothing. Keep container closed. Use with adequate ventilation. Wash thoroughly after handling.

Label First Aid:
If swallowed, call a physician immediately. If inhaled, remove to fresh air. Get medical attention for any breathing difficulty. In case of contact, immediately flush eyes or skin with plenty of water for at least 15 minutes.

Product Use:
Biological Buffer

Revision Information:
Pure. New 16 section MSDS format, all sections have been revised.

Disclaimer:
************************************************************************************************ Mallinckrodt Baker, Inc. provides the information contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This document is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose. MALLINCKRODT BAKER, INC. MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE INFORMATION SET FORTH HEREIN OR THE PRODUCT TO WHICH THE INFORMATION REFERS. ACCORDINGLY, MALLINCKRODT BAKER, INC. WILL NOT BE RESPONSIBLE FOR DAMAGES RESULTING FROM USE OF OR RELIANCE UPON THIS INFORMATION.
************************************************************************************************ Prepared by: Strategic Services Division
Phone Number: (314) 539-1600 (U.S.A.)